Commit 2c5c995f authored by Lorenzo "Palinuro" Faletra's avatar Lorenzo "Palinuro" Faletra
Browse files

Import Upstream version 4.19.37

parent b7edf9cc
......@@ -6,7 +6,7 @@ TL;DR summary
* Use only NEON instructions, or VFP instructions that don't rely on support
code
* Isolate your NEON code in a separate compilation unit, and compile it with
'-mfpu=neon -mfloat-abi=softfp'
'-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
NEON code
* Don't sleep in your NEON code, and be aware that it will be executed with
......@@ -87,7 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
Therefore, the recommended and only supported way of using NEON/VFP in the
kernel is by adhering to the following rules:
* isolate the NEON code in a separate compilation unit and compile it with
'-mfpu=neon -mfloat-abi=softfp';
'-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
into the unit containing the NEON code from a compilation unit which is *not*
built with the GCC flag '-mfpu=neon' set.
......
......@@ -44,6 +44,8 @@ stable kernels.
| Implementor | Component | Erratum ID | Kconfig |
+----------------+-----------------+-----------------+-----------------------------+
| Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 |
| | | | |
| ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 |
| ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 |
| ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 |
......
......@@ -38,6 +38,9 @@ Procedure for submitting patches to the -stable tree
- If the patch covers files in net/ or drivers/net please follow netdev stable
submission guidelines as described in
:ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
after first checking the stable networking queue at
https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
to ensure the requested patch is not already queued up.
- Security patches should not be handled (solely) by the -stable review
process but should follow the procedures in
:ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.
......
......@@ -13,7 +13,7 @@ of a virtual machine. The ioctls belong to three classes
- VM ioctls: These query and set attributes that affect an entire virtual
machine, for example memory layout. In addition a VM ioctl is used to
create virtual cpus (vcpus).
create virtual cpus (vcpus) and devices.
Only run VM ioctls from the same process (address space) that was used
to create the VM.
......@@ -24,6 +24,11 @@ of a virtual machine. The ioctls belong to three classes
Only run vcpu ioctls from the same thread that was used to create the
vcpu.
- device ioctls: These query and set attributes that control the operation
of a single device.
device ioctls must be issued from the same process (address space) that
was used to create the VM.
2. File descriptors
-------------------
......@@ -32,10 +37,11 @@ The kvm API is centered around file descriptors. An initial
open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
handle will create a VM file descriptor which can be used to issue VM
ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
and return a file descriptor pointing to it. Finally, ioctls on a vcpu
fd can be used to control the vcpu, including the important task of
actually running guest code.
ioctls. A KVM_CREATE_VCPU or KVM_CREATE_DEVICE ioctl on a VM fd will
create a virtual cpu or device and return a file descriptor pointing to
the new resource. Finally, ioctls on a vcpu or device fd can be used
to control the vcpu or device. For vcpus, this includes the important
task of actually running guest code.
In general file descriptors can be migrated among processes by means
of fork() and the SCM_RIGHTS facility of unix domain socket. These
......
......@@ -7320,6 +7320,12 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/intel/
INTEL ATOMISP2 DUMMY / POWER-MANAGEMENT DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel_atomisp2_pm.c
INTEL C600 SERIES SAS CONTROLLER DRIVER
M: Intel SCU Linux support <intel-linux-scu@intel.com>
M: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
......
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 19
SUBLEVEL = 28
SUBLEVEL = 37
EXTRAVERSION =
NAME = "People's Front"
......@@ -483,7 +483,7 @@ endif
ifeq ($(cc-name),clang)
ifneq ($(CROSS_COMPILE),)
CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%))
GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)
GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
endif
......@@ -626,12 +626,15 @@ ifeq ($(may-sync-config),1)
-include include/config/auto.conf.cmd
# To avoid any implicit rule to kick in, define an empty command
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
$(KCONFIG_CONFIG): ;
# The actual configuration files used during the build are stored in
# include/generated/ and include/config/. Update them if .config is newer than
# include/config/auto.conf (which mirrors .config).
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
#
# This exploits the 'multi-target pattern rule' trick.
# The syncconfig should be executed only once to make all the targets.
%/auto.conf %/auto.conf.cmd %/tristate.conf: $(KCONFIG_CONFIG)
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
else
# External modules and some install targets need include/generated/autoconf.h
......@@ -658,8 +661,7 @@ KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)
KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,)
KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
else
ifdef CONFIG_PROFILE_ALL_BRANCHES
KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,)
......@@ -948,9 +950,11 @@ mod_sign_cmd = true
endif
export mod_sign_cmd
HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
ifdef CONFIG_STACK_VALIDATION
has_libelf := $(call try-run,\
echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
ifeq ($(has_libelf),1)
objtool_target := tools/objtool FORCE
else
......
......@@ -420,6 +420,14 @@ config ARC_HAS_ACCL_REGS
(also referred to as r58:r59). These can also be used by gcc as GPR so
kernel needs to save/restore per process
config ARC_IRQ_NO_AUTOSAVE
bool "Disable hardware autosave regfile on interrupts"
default n
help
On HS cores, taken interrupt auto saves the regfile on stack.
This is programmable and can be optionally disabled in which case
software INTERRUPT_PROLOGUE/EPILGUE do the needed work
endif # ISA_ARCV2
endmenu # "ARC CPU Configuration"
......
......@@ -8,6 +8,7 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
......
......@@ -151,6 +151,14 @@ struct bcr_isa_arcv2 {
#endif
};
struct bcr_uarch_build_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:8, prod:8, maj:8, min:8;
#else
unsigned int min:8, maj:8, prod:8, pad:8;
#endif
};
struct bcr_mpy {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
......
......@@ -17,6 +17,33 @@
;
; Now manually save: r12, sp, fp, gp, r25
#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
.ifnc \called_from, exception
st.as r9, [sp, -10] ; save r9 in it's final stack slot
sub sp, sp, 12 ; skip JLI, LDI, EI
PUSH lp_count
PUSHAX lp_start
PUSHAX lp_end
PUSH blink
PUSH r11
PUSH r10
sub sp, sp, 4 ; skip r9
PUSH r8
PUSH r7
PUSH r6
PUSH r5
PUSH r4
PUSH r3
PUSH r2
PUSH r1
PUSH r0
.endif
#endif
#ifdef CONFIG_ARC_HAS_ACCL_REGS
PUSH r59
PUSH r58
......@@ -86,6 +113,33 @@
POP r59
#endif
#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
.ifnc \called_from, exception
POP r0
POP r1
POP r2
POP r3
POP r4
POP r5
POP r6
POP r7
POP r8
POP r9
POP r10
POP r11
POP blink
POPAX lp_end
POPAX lp_start
POP r9
mov lp_count, r9
add sp, sp, 12 ; skip JLI, LDI, EI
ld.as r9, [sp, -10] ; reload r9 which got clobbered
.endif
#endif
.endm
/*------------------------------------------------------------------------*/
......
......@@ -207,7 +207,7 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
*/
"=&r" (tmp), "+r" (to), "+r" (from)
:
: "lp_count", "lp_start", "lp_end", "memory");
: "lp_count", "memory");
return n;
}
......@@ -433,7 +433,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
*/
"=&r" (tmp), "+r" (to), "+r" (from)
:
: "lp_count", "lp_start", "lp_end", "memory");
: "lp_count", "memory");
return n;
}
......@@ -653,7 +653,7 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
" .previous \n"
: "+r"(d_char), "+r"(res)
: "i"(0)
: "lp_count", "lp_start", "lp_end", "memory");
: "lp_count", "memory");
return res;
}
......@@ -686,7 +686,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
" .previous \n"
: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
: "g"(-EFAULT), "r"(count)
: "lp_count", "lp_start", "lp_end", "memory");
: "lp_count", "memory");
return res;
}
......
......@@ -209,7 +209,9 @@ restore_regs:
;####### Return from Intr #######
debug_marker_l1:
bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
btst r0, STATUS_DE_BIT ; Z flag set if bit clear
bnz .Lintr_ret_to_delay_slot ; branch if STATUS_DE_BIT set
.Lisr_ret_fast_path:
; Handle special case #1: (Entry via Exception, Return via IRQ)
......
......@@ -107,6 +107,7 @@ ENTRY(stext)
; r2 = pointer to uboot provided cmdline or external DTB in mem
; These are handled later in handle_uboot_args()
st r0, [@uboot_tag]
st r1, [@uboot_magic]
st r2, [@uboot_arg]
#endif
......
......@@ -49,11 +49,13 @@ void arc_init_IRQ(void)
*(unsigned int *)&ictrl = 0;
#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
ictrl.save_nr_gpr_pairs = 6; /* r0 to r11 (r12 saved manually) */
ictrl.save_blink = 1;
ictrl.save_lp_regs = 1; /* LP_COUNT, LP_START, LP_END */
ictrl.save_u_to_u = 0; /* user ctxt saved on kernel stack */
ictrl.save_idx_regs = 1; /* JLI, LDI, EI */
#endif
WRITE_AUX(AUX_IRQ_CTRL, ictrl);
......
......@@ -35,6 +35,7 @@ unsigned int intr_to_DE_cnt;
/* Part of U-boot ABI: see head.S */
int __initdata uboot_tag;
int __initdata uboot_magic;
char __initdata *uboot_arg;
const struct machine_desc *machine_desc;
......@@ -196,13 +197,29 @@ static void read_arc_build_cfg_regs(void)
cpu->bpu.num_pred = 2048 << bpu.pte;
if (cpu->core.family >= 0x54) {
unsigned int exec_ctrl;
READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
cpu->extn.dual_enb = !(exec_ctrl & 1);
struct bcr_uarch_build_arcv2 uarch;
/* dual issue always present for this core */
cpu->extn.dual = 1;
/*
* The first 0x54 core (uarch maj:min 0:1 or 0:2) was
* dual issue only (HS4x). But next uarch rev (1:0)
* allows it be configured for single issue (HS3x)
* Ensure we fiddle with dual issue only on HS4x
*/
READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
if (uarch.prod == 4) {
unsigned int exec_ctrl;
/* dual issue hardware always present */
cpu->extn.dual = 1;
READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
/* dual issue hardware enabled ? */
cpu->extn.dual_enb = !(exec_ctrl & 1);
}
}
}
......@@ -468,6 +485,8 @@ static inline bool uboot_arg_invalid(unsigned long addr)
#define UBOOT_TAG_NONE 0
#define UBOOT_TAG_CMDLINE 1
#define UBOOT_TAG_DTB 2
/* We always pass 0 as magic from U-boot */
#define UBOOT_MAGIC_VALUE 0
void __init handle_uboot_args(void)
{
......@@ -483,6 +502,11 @@ void __init handle_uboot_args(void)
goto ignore_uboot_args;
}
if (uboot_magic != UBOOT_MAGIC_VALUE) {
pr_warn(IGNORE_ARGS "non zero uboot magic\n");
goto ignore_uboot_args;
}
if (uboot_tag != UBOOT_TAG_NONE &&
uboot_arg_invalid((unsigned long)uboot_arg)) {
pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);
......
......@@ -25,15 +25,11 @@
#endif
#ifdef CONFIG_ARC_HAS_LL64
# define PREFETCH_READ(RX) prefetch [RX, 56]
# define PREFETCH_WRITE(RX) prefetchw [RX, 64]
# define LOADX(DST,RX) ldd.ab DST, [RX, 8]
# define STOREX(SRC,RX) std.ab SRC, [RX, 8]
# define ZOLSHFT 5
# define ZOLAND 0x1F
#else
# define PREFETCH_READ(RX) prefetch [RX, 28]
# define PREFETCH_WRITE(RX) prefetchw [RX, 32]
# define LOADX(DST,RX) ld.ab DST, [RX, 4]
# define STOREX(SRC,RX) st.ab SRC, [RX, 4]
# define ZOLSHFT 4
......@@ -41,8 +37,6 @@
#endif
ENTRY_CFI(memcpy)
prefetch [r1] ; Prefetch the read location
prefetchw [r0] ; Prefetch the write location
mov.f 0, r2
;;; if size is zero
jz.d [blink]
......@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy32_64bytes
;; LOOP START
LOADX (r6, r1)
PREFETCH_READ (r1)
PREFETCH_WRITE (r3)
LOADX (r8, r1)
LOADX (r10, r1)
LOADX (r4, r1)
......@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_1
;; LOOP START
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 24)
or r7, r7, r5
......@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_2
;; LOOP START
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 16)
or r7, r7, r5
......@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_3
;; LOOP START
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 8)
or r7, r7, r5
......
......@@ -9,6 +9,7 @@ menuconfig ARC_SOC_HSDK
bool "ARC HS Development Kit SOC"
depends on ISA_ARCV2
select ARC_HAS_ACCL_REGS
select ARC_IRQ_NO_AUTOSAVE
select CLK_HSDK
select RESET_HSDK
select MIGHT_HAVE_PCI
......@@ -1444,6 +1444,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
......
......@@ -57,6 +57,24 @@ wlan_en_reg: fixedregulator2 {
enable-active-high;
};
/* TPS79501 */
v1_8d_reg: fixedregulator-v1_8d {
compatible = "regulator-fixed";
regulator-name = "v1_8d";
vin-supply = <&vbat>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/* TPS79501 */
v3_3d_reg: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "v3_3d";
vin-supply = <&vbat>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
......@@ -499,10 +517,10 @@ tlv320aic3106: tlv320aic3106@1b {
status = "okay";
/* Regulators */
AVDD-supply = <&vaux2_reg>;
IOVDD-supply = <&vaux2_reg>;
DRVDD-supply = <&vaux2_reg>;
DVDD-supply = <&vbat>;
AVDD-supply = <&v3_3d_reg>;
IOVDD-supply = <&v3_3d_reg>;
DRVDD-supply = <&v3_3d_reg>;
DVDD-supply = <&v1_8d_reg>;
};
};
......
......@@ -73,6 +73,24 @@ vtt_fixed: fixedregulator3 {
enable-active-high;
};
/* TPS79518 */
v1_8d_reg: fixedregulator-v1_8d {
compatible = "regulator-fixed";
regulator-name = "v1_8d";
vin-supply = <&vbat>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/* TPS78633 */
v3_3d_reg: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "v3_3d";
vin-supply = <&vbat>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
......@@ -501,10 +519,10 @@ tlv320aic3106: tlv320aic3106@1b {
status = "okay";
/* Regulators */
AVDD-supply = <&vaux2_reg>;
IOVDD-supply = <&vaux2_reg>;
DRVDD-supply = <&vaux2_reg>;
DVDD-supply = <&vbat>;
AVDD-supply = <&v3_3d_reg>;
IOVDD-supply = <&v3_3d_reg>;
DRVDD-supply = <&v3_3d_reg>;
DVDD-supply = <&v1_8d_reg>;
};
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment