Commit 90e307ca authored by Lorenzo "Palinuro" Faletra's avatar Lorenzo "Palinuro" Faletra
Browse files

Import Upstream version 4.14.7

parent 3f5c81f7
......@@ -34,6 +34,10 @@ Required properties:
- reg: I2C address
Optional properties:
- smbus-timeout-disable: When set, the smbus timeout function will be disabled.
This is not supported on all chips.
Example:
temp-sensor@1a {
......
......@@ -20,16 +20,16 @@ Required Properties:
(CMT1 on sh73a0 and r8a7740)
This is a fallback for the above renesas,cmt-48-* entries.
- "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4.
- "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4.
- "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790.
- "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790.
- "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791.
- "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791.
- "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793.
- "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793.
- "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794.
- "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794.
- "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
- "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
- "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
- "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791.
- "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793.
- "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
- "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
- "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
......@@ -46,7 +46,7 @@ Required Properties:
Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
cmt0: timer@ffca0000 {
compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0";
compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
reg = <0 0xffca0000 0 0x1004>;
interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
<0 142 IRQ_TYPE_LEVEL_HIGH>;
......@@ -55,7 +55,7 @@ Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
};
cmt1: timer@e6130000 {
compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1";
compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
<0 121 IRQ_TYPE_LEVEL_HIGH>,
......
......@@ -11,7 +11,7 @@ Required properties:
be used, but a device adhering to this binding may leave out all except
for usbVID,PID.
- reg: the port number which this device is connecting to, the range
is 1-31.
is 1-255.
Example:
......
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 14
SUBLEVEL = 2
SUBLEVEL = 7
EXTRAVERSION =
NAME = Petit Gorille
......@@ -373,9 +373,6 @@ LDFLAGS_MODULE =
CFLAGS_KERNEL =
AFLAGS_KERNEL =
LDFLAGS_vmlinux =
CFLAGS_GCOV := -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,)
CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,)
# Use USERINCLUDE when you must reference the UAPI directories only.
USERINCLUDE := \
......@@ -394,21 +391,19 @@ LINUXINCLUDE := \
-I$(objtree)/include \
$(USERINCLUDE)
KBUILD_CPPFLAGS := -D__KERNEL__
KBUILD_AFLAGS := -D__ASSEMBLY__
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common -fshort-wchar \
-Werror-implicit-function-declaration \
-Wno-format-security \
-std=gnu89 $(call cc-option,-fno-PIE)
-std=gnu89
KBUILD_CPPFLAGS := -D__KERNEL__
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
GCC_PLUGINS_CFLAGS :=
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
......@@ -421,7 +416,7 @@ export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KCOV CFLAGS_KASAN CFLAGS_UBSAN
export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_KASAN CFLAGS_UBSAN
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
......@@ -622,6 +617,12 @@ endif
# Defaults to vmlinux, but the arch makefile usually adds further targets
all: vmlinux
KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
CFLAGS_GCOV := -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,)
CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,)
export CFLAGS_GCOV CFLAGS_KCOV
# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
# values of the respective KBUILD_* variables
ARCH_CPPFLAGS :=
......
......@@ -91,7 +91,7 @@ config STATIC_KEYS_SELFTEST
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
select TASKS_RCU if PREEMPT
config KPROBES_ON_FTRACE
def_bool y
......
......@@ -433,15 +433,6 @@ gpt: timer@53fa0000 {
clock-names = "ipg", "per";
};
srtc: srtc@53fa4000 {
compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
reg = <0x53fa4000 0x4000>;
interrupts = <24>;
interrupt-parent = <&tzic>;
clocks = <&clks IMX5_CLK_SRTC_GATE>;
clock-names = "ipg";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
......
......@@ -518,4 +518,22 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
#endif
.endm
.macro bug, msg, line
#ifdef CONFIG_THUMB2_KERNEL
1: .inst 0xde02
#else
1: .inst 0xe7f001f2
#endif
#ifdef CONFIG_DEBUG_BUGVERBOSE
.pushsection .rodata.str, "aMS", %progbits, 1
2: .asciz "\msg"
.popsection
.pushsection __bug_table, "aw"
.align 2
.word 1b, 2b
.hword \line
.popsection
#endif
.endm
#endif /* __ASM_ASSEMBLER_H__ */
......@@ -161,8 +161,7 @@
#else
#define VTTBR_X (5 - KVM_T0SZ)
#endif
#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_X)
#define VTTBR_VMID_SHIFT _AC(48, ULL)
#define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
......
......@@ -300,6 +300,8 @@
mov r2, sp
ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr
ldr lr, [r2, #\offset + S_PC]! @ get pc
tst r1, #PSR_I_BIT | 0x0f
bne 1f
msr spsr_cxsf, r1 @ save in spsr_svc
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
@ We must avoid clrex due to Cortex-A15 erratum #830321
......@@ -314,6 +316,7 @@
@ after ldm {}^
add sp, sp, #\offset + PT_REGS_SIZE
movs pc, lr @ return & move spsr_svc into cpsr
1: bug "Returning to usermode but unexpected PSR bits set?", \@
#elif defined(CONFIG_CPU_V7M)
@ V7M restore.
@ Note that we don't need to do clrex here as clearing the local
......@@ -329,6 +332,8 @@
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC] @ get pc
add sp, sp, #\offset + S_SP
tst r1, #PSR_I_BIT | 0x0f
bne 1f
msr spsr_cxsf, r1 @ save in spsr_svc
@ We must avoid clrex due to Cortex-A15 erratum #830321
......@@ -341,6 +346,7 @@
.endif
add sp, sp, #PT_REGS_SIZE - S_SP
movs pc, lr @ return & move spsr_svc into cpsr
1: bug "Returning to usermode but unexpected PSR bits set?", \@
#endif /* !CONFIG_THUMB2_KERNEL */
.endm
......
......@@ -129,8 +129,8 @@ static const struct prot_bits section_bits[] = {
.val = PMD_SECT_USER,
.set = "USR",
}, {
.mask = L_PMD_SECT_RDONLY,
.val = L_PMD_SECT_RDONLY,
.mask = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
.val = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
.set = "ro",
.clear = "RW",
#elif __LINUX_ARM_ARCH__ >= 6
......
......@@ -639,8 +639,8 @@ static struct section_perm ro_perms[] = {
.start = (unsigned long)_stext,
.end = (unsigned long)__init_begin,
#ifdef CONFIG_ARM_LPAE
.mask = ~L_PMD_SECT_RDONLY,
.prot = L_PMD_SECT_RDONLY,
.mask = ~(L_PMD_SECT_RDONLY | PMD_SECT_AP2),
.prot = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
#else
.mask = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
.prot = PMD_SECT_APX | PMD_SECT_AP_WRITE,
......
......@@ -77,9 +77,6 @@ endif
ifeq ($(CONFIG_ARM64_MODULE_PLTS),y)
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm64/kernel/module.lds
ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
KBUILD_LDFLAGS_MODULE += $(objtree)/arch/arm64/kernel/ftrace-mod.o
endif
endif
# Default value
......
......@@ -49,6 +49,14 @@
/ {
compatible = "amlogic,meson-gxl";
reserved-memory {
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
secmon_reserved_alt: secmon@05000000 {
reg = <0x0 0x05000000 0x0 0x300000>;
no-map;
};
};
};
&ethmac {
......
......@@ -215,7 +215,6 @@ typedef struct compat_siginfo {
} compat_siginfo_t;
#define COMPAT_OFF_T_MAX 0x7fffffff
#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
/*
* A pointer passed in from user mode. This should not
......
......@@ -132,11 +132,9 @@ static inline void efi_set_pgd(struct mm_struct *mm)
* Defer the switch to the current thread's TTBR0_EL1
* until uaccess_enable(). Restore the current
* thread's saved ttbr0 corresponding to its active_mm
* (if different from init_mm).
*/
cpu_set_reserved_ttbr0();
if (current->active_mm != &init_mm)
update_saved_ttbr0(current, current->active_mm);
update_saved_ttbr0(current, current->active_mm);
}
}
}
......
......@@ -170,8 +170,7 @@
#define VTCR_EL2_FLAGS (VTCR_EL2_COMMON_BITS | VTCR_EL2_TGRAN_FLAGS)
#define VTTBR_X (VTTBR_X_TGRAN_MAGIC - VTCR_EL2_T0SZ_IPA)
#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_X)
#define VTTBR_VMID_SHIFT (UL(48))
#define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
......
......@@ -156,29 +156,21 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; })
/*
* This is called when "tsk" is about to enter lazy TLB mode.
*
* mm: describes the currently active mm context
* tsk: task which is entering lazy tlb
* cpu: cpu number which is entering lazy tlb
*
* tsk->mm will be NULL
*/
static inline void
enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
}
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
static inline void update_saved_ttbr0(struct task_struct *tsk,
struct mm_struct *mm)
{
if (system_uses_ttbr0_pan()) {
BUG_ON(mm->pgd == swapper_pg_dir);
task_thread_info(tsk)->ttbr0 =
virt_to_phys(mm->pgd) | ASID(mm) << 48;
}
u64 ttbr;
if (!system_uses_ttbr0_pan())
return;
if (mm == &init_mm)
ttbr = __pa_symbol(empty_zero_page);
else
ttbr = virt_to_phys(mm->pgd) | ASID(mm) << 48;
task_thread_info(tsk)->ttbr0 = ttbr;
}
#else
static inline void update_saved_ttbr0(struct task_struct *tsk,
......@@ -187,6 +179,16 @@ static inline void update_saved_ttbr0(struct task_struct *tsk,
}
#endif
static inline void
enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
/*
* We don't actually care about the ttbr0 mapping, so point it at the
* zero page.
*/
update_saved_ttbr0(tsk, &init_mm);
}
static inline void __switch_mm(struct mm_struct *next)
{
unsigned int cpu = smp_processor_id();
......@@ -214,11 +216,9 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
* Update the saved TTBR0_EL1 of the scheduled-in task as the previous
* value may have not been initialised yet (activate_mm caller) or the
* ASID has changed since the last run (following the context switch
* of another thread of the same process). Avoid setting the reserved
* TTBR0_EL1 to swapper_pg_dir (init_mm; e.g. via idle_task_exit).
* of another thread of the same process).
*/
if (next != &init_mm)
update_saved_ttbr0(tsk, next);
update_saved_ttbr0(tsk, next);
}
#define deactivate_mm(tsk,mm) do { } while (0)
......
......@@ -32,7 +32,7 @@ struct mod_arch_specific {
struct mod_plt_sec init;
/* for CONFIG_DYNAMIC_FTRACE */
void *ftrace_trampoline;
struct plt_entry *ftrace_trampoline;
};
#endif
......@@ -45,4 +45,48 @@ extern u64 module_alloc_base;
#define module_alloc_base ((u64)_etext - MODULES_VSIZE)
#endif
struct plt_entry {
/*
* A program that conforms to the AArch64 Procedure Call Standard
* (AAPCS64) must assume that a veneer that alters IP0 (x16) and/or
* IP1 (x17) may be inserted at any branch instruction that is
* exposed to a relocation that supports long branches. Since that
* is exactly what we are dealing with here, we are free to use x16
* as a scratch register in the PLT veneers.
*/
__le32 mov0; /* movn x16, #0x.... */
__le32 mov1; /* movk x16, #0x...., lsl #16 */
__le32 mov2; /* movk x16, #0x...., lsl #32 */
__le32 br; /* br x16 */
};
static inline struct plt_entry get_plt_entry(u64 val)
{
/*
* MOVK/MOVN/MOVZ opcode:
* +--------+------------+--------+-----------+-------------+---------+
* | sf[31] | opc[30:29] | 100101 | hw[22:21] | imm16[20:5] | Rd[4:0] |
* +--------+------------+--------+-----------+-------------+---------+
*
* Rd := 0x10 (x16)
* hw := 0b00 (no shift), 0b01 (lsl #16), 0b10 (lsl #32)
* opc := 0b11 (MOVK), 0b00 (MOVN), 0b10 (MOVZ)
* sf := 1 (64-bit variant)
*/
return (struct plt_entry){
cpu_to_le32(0x92800010 | (((~val ) & 0xffff)) << 5),
cpu_to_le32(0xf2a00010 | ((( val >> 16) & 0xffff)) << 5),
cpu_to_le32(0xf2c00010 | ((( val >> 32) & 0xffff)) << 5),
cpu_to_le32(0xd61f0200)
};
}
static inline bool plt_entries_equal(const struct plt_entry *a,
const struct plt_entry *b)
{
return a->mov0 == b->mov0 &&
a->mov1 == b->mov1 &&
a->mov2 == b->mov2;
}
#endif /* __ASM_MODULE_H */
......@@ -98,6 +98,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == (PTE_VALID | PTE_UXN))
#define pte_valid_young(pte) \
((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
#define pte_valid_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
/*
* Could the pte be present in the TLB? We must check mm_tlb_flush_pending
......@@ -107,6 +109,18 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
#define pte_accessible(mm, pte) \
(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid_young(pte))
/*
* p??_access_permitted() is true for valid user mappings (subject to the
* write permission check) other than user execute-only which do not have the
* PTE_USER bit set. PROT_NONE mappings do not have the PTE_VALID bit set.
*/
#define pte_access_permitted(pte, write) \
(pte_valid_user(pte) && (!(write) || pte_write(pte)))
#define pmd_access_permitted(pmd, write) \
(pte_access_permitted(pmd_pte(pmd), (write)))
#define pud_access_permitted(pud, write) \
(pte_access_permitted(pud_pte(pud), (write)))
static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
{
pte_val(pte) &= ~pgprot_val(prot);
......
......@@ -63,6 +63,3 @@ extra-y += $(head-y) vmlinux.lds
ifeq ($(CONFIG_DEBUG_EFI),y)
AFLAGS_head.o += -DVMLINUX_PATH="\"$(realpath $(objtree)/vmlinux)\""
endif
# will be included by each individual module but not by the core kernel itself
extra-$(CONFIG_DYNAMIC_FTRACE) += ftrace-mod.o
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment