Commit 988e1bbc authored by Lorenzo "Palinuro" Faletra's avatar Lorenzo "Palinuro" Faletra
Browse files

Import Upstream version 5.6.14

parent 99f0f4f4
Pipeline #498 failed with stages
in 1 minute and 48 seconds
......@@ -86,6 +86,8 @@ ForEachMacros:
- 'bio_for_each_segment_all'
- 'bio_list_for_each'
- 'bip_for_each_vec'
- 'bitmap_for_each_clear_region'
- 'bitmap_for_each_set_region'
- 'blkg_for_each_descendant_post'
- 'blkg_for_each_descendant_pre'
- 'blk_queue_for_each_rl'
......@@ -115,6 +117,7 @@ ForEachMacros:
- 'drm_client_for_each_connector_iter'
- 'drm_client_for_each_modeset'
- 'drm_connector_for_each_possible_encoder'
- 'drm_for_each_bridge_in_chain'
- 'drm_for_each_connector_iter'
- 'drm_for_each_crtc'
- 'drm_for_each_encoder'
......@@ -136,9 +139,10 @@ ForEachMacros:
- 'for_each_bio'
- 'for_each_board_func_rsrc'
- 'for_each_bvec'
- 'for_each_card_auxs'
- 'for_each_card_auxs_safe'
- 'for_each_card_components'
- 'for_each_card_links'
- 'for_each_card_links_safe'
- 'for_each_card_pre_auxs'
- 'for_each_card_prelinks'
- 'for_each_card_rtds'
- 'for_each_card_rtds_safe'
......@@ -166,6 +170,7 @@ ForEachMacros:
- 'for_each_dpcm_fe'
- 'for_each_drhd_unit'
- 'for_each_dss_dev'
- 'for_each_efi_handle'
- 'for_each_efi_memory_desc'
- 'for_each_efi_memory_desc_in_map'
- 'for_each_element'
......@@ -190,6 +195,7 @@ ForEachMacros:
- 'for_each_lru'
- 'for_each_matching_node'
- 'for_each_matching_node_and_match'
- 'for_each_member'
- 'for_each_memblock'
- 'for_each_memblock_type'
- 'for_each_memcg_cache_index'
......@@ -200,9 +206,11 @@ ForEachMacros:
- 'for_each_msi_entry'
- 'for_each_msi_entry_safe'
- 'for_each_net'
- 'for_each_net_continue_reverse'
- 'for_each_netdev'
- 'for_each_netdev_continue'
- 'for_each_netdev_continue_rcu'
- 'for_each_netdev_continue_reverse'
- 'for_each_netdev_feature'
- 'for_each_netdev_in_bond_rcu'
- 'for_each_netdev_rcu'
......@@ -254,10 +262,10 @@ ForEachMacros:
- 'for_each_reserved_mem_region'
- 'for_each_rtd_codec_dai'
- 'for_each_rtd_codec_dai_rollback'
- 'for_each_rtdcom'
- 'for_each_rtdcom_safe'
- 'for_each_rtd_components'
- 'for_each_set_bit'
- 'for_each_set_bit_from'
- 'for_each_set_clump8'
- 'for_each_sg'
- 'for_each_sg_dma_page'
- 'for_each_sg_page'
......@@ -267,6 +275,7 @@ ForEachMacros:
- 'for_each_subelement_id'
- '__for_each_thread'
- 'for_each_thread'
- 'for_each_wakeup_source'
- 'for_each_zone'
- 'for_each_zone_zonelist'
- 'for_each_zone_zonelist_nodemask'
......@@ -330,6 +339,7 @@ ForEachMacros:
- 'list_for_each'
- 'list_for_each_codec'
- 'list_for_each_codec_safe'
- 'list_for_each_continue'
- 'list_for_each_entry'
- 'list_for_each_entry_continue'
- 'list_for_each_entry_continue_rcu'
......@@ -351,6 +361,7 @@ ForEachMacros:
- 'llist_for_each_entry'
- 'llist_for_each_entry_safe'
- 'llist_for_each_safe'
- 'mci_for_each_dimm'
- 'media_device_for_each_entity'
- 'media_device_for_each_intf'
- 'media_device_for_each_link'
......@@ -444,10 +455,16 @@ ForEachMacros:
- 'virtio_device_for_each_vq'
- 'xa_for_each'
- 'xa_for_each_marked'
- 'xa_for_each_range'
- 'xa_for_each_start'
- 'xas_for_each'
- 'xas_for_each_conflict'
- 'xas_for_each_marked'
- 'xbc_array_for_each_value'
- 'xbc_for_each_key_value'
- 'xbc_node_for_each_array_value'
- 'xbc_node_for_each_child'
- 'xbc_node_for_each_key_value'
- 'zorro_for_each_dev'
#IncludeBlocks: Preserve # Unknown to clang-format-5.0
......
......@@ -18,6 +18,7 @@ Aleksey Gorelov <aleksey_gorelov@phoenix.com>
Aleksandar Markovic <aleksandar.markovic@mips.com> <aleksandar.markovic@imgtec.com>
Alex Shi <alex.shi@linux.alibaba.com> <alex.shi@intel.com>
Alex Shi <alex.shi@linux.alibaba.com> <alex.shi@linaro.org>
Alexandre Belloni <alexandre.belloni@bootlin.com> <alexandre.belloni@free-electrons.com>
Alexei Starovoitov <ast@kernel.org> <ast@plumgrid.com>
Alexei Starovoitov <ast@kernel.org> <alexei.starovoitov@gmail.com>
Alexei Starovoitov <ast@kernel.org> <ast@fb.com>
......@@ -27,6 +28,8 @@ Andi Shyti <andi@etezian.org> <andi.shyti@samsung.com>
Andreas Herrmann <aherrman@de.ibm.com>
Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
Andrew Morton <akpm@linux-foundation.org>
Andrew Murray <amurray@thegoodpenguin.co.uk> <andrew.murray@arm.com>
Andrew Murray <amurray@thegoodpenguin.co.uk> <amurray@embedded-bits.co.uk>
Andrew Vasquez <andrew.vasquez@qlogic.com>
Andy Adamson <andros@citi.umich.edu>
Antoine Tenart <antoine.tenart@free-electrons.com>
......@@ -74,6 +77,7 @@ Dmitry Safonov <0x7f454c46@gmail.com> <dima@arista.com>
Domen Puncer <domen@coderock.org>
Douglas Gilbert <dougg@torque.net>
Ed L. Cashin <ecashin@coraid.com>
Erik Kaneda <erik.kaneda@intel.com> <erik.schmauss@intel.com>
Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Felipe W Damasio <felipewd@terra.com.br>
Felix Kuhling <fxkuehl@gmx.de>
......@@ -138,6 +142,7 @@ Juha Yrjola <at solidboot.com>
Juha Yrjola <juha.yrjola@nokia.com>
Juha Yrjola <juha.yrjola@solidboot.com>
Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
Kamil Konieczny <k.konieczny@samsung.com> <k.konieczny@partner.samsung.com>
Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
......@@ -209,6 +214,10 @@ Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Patrick Mochel <mochel@digitalimplant.org>
Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
Paul E. McKenney <paulmck@kernel.org> <paulmck@linux.ibm.com>
Paul E. McKenney <paulmck@kernel.org> <paulmck@linux.vnet.ibm.com>
Paul E. McKenney <paulmck@kernel.org> <paul.mckenney@linaro.org>
Paul E. McKenney <paulmck@kernel.org> <paulmck@us.ibm.com>
Peter A Jonsson <pj@ludd.ltu.se>
Peter Oruba <peter@oruba.de>
Peter Oruba <peter.oruba@amd.com>
......@@ -216,7 +225,9 @@ Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
Praveen BP <praveenbp@ti.com>
Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
Rajesh Shah <rajesh.shah@intel.com>
Ralf Baechle <ralf@linux-mips.org>
Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
......@@ -252,6 +263,7 @@ Sumit Semwal <sumit.semwal@ti.com>
Tejun Heo <htejun@gmail.com>
Thomas Graf <tgraf@suug.ch>
Thomas Pedersen <twp@codeaurora.org>
Tiezhu Yang <yangtiezhu@loongson.cn> <kernelpatch@126.com>
Todor Tomov <todor.too@gmail.com> <todor.tomov@linaro.org>
Tony Luck <tony.luck@intel.com>
TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
......
......@@ -16,3 +16,5 @@ In addition, other licenses may also apply. Please see:
Documentation/process/license-rules.rst
for more details.
All contributions to the Linux Kernel are subject to this COPYING file.
......@@ -567,6 +567,11 @@ D: Original author of Amiga FFS filesystem
S: Orlando, Florida
S: USA
N: Paul Burton
E: paulburton@kernel.org
W: https://pburton.com
D: MIPS maintainer 2018-2020
N: Lennert Buytenhek
E: kernel@wantstofly.org
D: Original (2.4) rewrite of the ethernet bridging code
......@@ -3302,7 +3307,9 @@ S: France
N: Aleksa Sarai
E: cyphar@cyphar.com
W: https://www.cyphar.com/
D: `pids` cgroup subsystem
D: /sys/fs/cgroup/pids
D: openat2(2)
S: Sydney, Australia
N: Dipankar Sarma
E: dipankar@in.ibm.com
......
What: /sys/fs/selinux/disable
Date: April 2005 (predates git)
KernelVersion: 2.6.12-rc2 (predates git)
Contact: selinux@vger.kernel.org
Description:
The selinuxfs "disable" node allows SELinux to be disabled at runtime
prior to a policy being loaded into the kernel. If disabled via this
mechanism, SELinux will remain disabled until the system is rebooted.
The preferred method of disabling SELinux is via the "selinux=0" boot
parameter, but the selinuxfs "disable" node was created to make it
easier for systems with primitive bootloaders that did not allow for
easy modification of the kernel command line. Unfortunately, allowing
for SELinux to be disabled at runtime makes it difficult to secure the
kernel's LSM hooks using the "__ro_after_init" feature.
Thankfully, the need for the SELinux runtime disable appears to be
gone, the default Kconfig configuration disables this selinuxfs node,
and only one of the major distributions, Fedora, supports disabling
SELinux at runtime. Fedora is in the process of removing the
selinuxfs "disable" node and once that is complete we will start the
slow process of removing this code from the kernel.
More information on /sys/fs/selinux/disable can be found under the
CONFIG_SECURITY_SELINUX_DISABLE Kconfig option.
What: /sys/class/tpm/tpmX/device/
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The device/ directory under a specific TPM instance exposes
the properties of that TPM chip
......@@ -9,7 +9,7 @@ Description: The device/ directory under a specific TPM instance exposes
What: /sys/class/tpm/tpmX/device/active
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "active" property prints a '1' if the TPM chip is accepting
commands. An inactive TPM chip still contains all the state of
an active chip (Storage Root Key, NVRAM, etc), and can be
......@@ -21,7 +21,7 @@ Description: The "active" property prints a '1' if the TPM chip is accepting
What: /sys/class/tpm/tpmX/device/cancel
Date: June 2005
KernelVersion: 2.6.13
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "cancel" property allows you to cancel the currently
pending TPM command. Writing any value to cancel will call the
TPM vendor specific cancel operation.
......@@ -29,7 +29,7 @@ Description: The "cancel" property allows you to cancel the currently
What: /sys/class/tpm/tpmX/device/caps
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "caps" property contains TPM manufacturer and version info.
Example output:
......@@ -46,7 +46,7 @@ Description: The "caps" property contains TPM manufacturer and version info.
What: /sys/class/tpm/tpmX/device/durations
Date: March 2011
KernelVersion: 3.1
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "durations" property shows the 3 vendor-specific values
used to wait for a short, medium and long TPM command. All
TPM commands are categorized as short, medium or long in
......@@ -69,7 +69,7 @@ Description: The "durations" property shows the 3 vendor-specific values
What: /sys/class/tpm/tpmX/device/enabled
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "enabled" property prints a '1' if the TPM chip is enabled,
meaning that it should be visible to the OS. This property
may be visible but produce a '0' after some operation that
......@@ -78,7 +78,7 @@ Description: The "enabled" property prints a '1' if the TPM chip is enabled,
What: /sys/class/tpm/tpmX/device/owned
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "owned" property produces a '1' if the TPM_TakeOwnership
ordinal has been executed successfully in the chip. A '0'
indicates that ownership hasn't been taken.
......@@ -86,7 +86,7 @@ Description: The "owned" property produces a '1' if the TPM_TakeOwnership
What: /sys/class/tpm/tpmX/device/pcrs
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "pcrs" property will dump the current value of all Platform
Configuration Registers in the TPM. Note that since these
values may be constantly changing, the output is only valid
......@@ -109,7 +109,7 @@ Description: The "pcrs" property will dump the current value of all Platform
What: /sys/class/tpm/tpmX/device/pubek
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "pubek" property will return the TPM's public endorsement
key if possible. If the TPM has had ownership established and
is version 1.2, the pubek will not be available without the
......@@ -161,7 +161,7 @@ Description: The "pubek" property will return the TPM's public endorsement
What: /sys/class/tpm/tpmX/device/temp_deactivated
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "temp_deactivated" property returns a '1' if the chip has
been temporarily deactivated, usually until the next power
cycle. Whether a warm boot (reboot) will clear a TPM chip
......@@ -170,7 +170,7 @@ Description: The "temp_deactivated" property returns a '1' if the chip has
What: /sys/class/tpm/tpmX/device/timeouts
Date: March 2011
KernelVersion: 3.1
Contact: tpmdd-devel@lists.sf.net
Contact: linux-integrity@vger.kernel.org
Description: The "timeouts" property shows the 4 vendor-specific values
for the TPM's interface spec timeouts. The use of these
timeouts is defined by the TPM interface spec that the chip
......@@ -183,3 +183,14 @@ Description: The "timeouts" property shows the 4 vendor-specific values
The four timeout values are shown in usecs, with a trailing
"[original]" or "[adjusted]" depending on whether the values
were scaled by the driver to be reported in usec from msecs.
What: /sys/class/tpm/tpmX/tpm_version_major
Date: October 2019
KernelVersion: 5.5
Contact: linux-integrity@vger.kernel.org
Description: The "tpm_version_major" property shows the TCG spec major version
implemented by the TPM device.
Example output:
2
What: sys/bus/dsa/devices/dsa<m>/cdev_major
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The major number that the character device driver assigned to
this device.
What: sys/bus/dsa/devices/dsa<m>/errors
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The error information for this device.
What: sys/bus/dsa/devices/dsa<m>/max_batch_size
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The largest number of work descriptors in a batch.
What: sys/bus/dsa/devices/dsa<m>/max_work_queues_size
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The maximum work queue size supported by this device.
What: sys/bus/dsa/devices/dsa<m>/max_engines
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The maximum number of engines supported by this device.
What: sys/bus/dsa/devices/dsa<m>/max_groups
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The maximum number of groups can be created under this device.
What: sys/bus/dsa/devices/dsa<m>/max_tokens
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The total number of bandwidth tokens supported by this device.
The bandwidth tokens represent resources within the DSA
implementation, and these resources are allocated by engines to
support operations.
What: sys/bus/dsa/devices/dsa<m>/max_transfer_size
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The number of bytes to be read from the source address to
perform the operation. The maximum transfer size is dependent on
the workqueue the descriptor was submitted to.
What: sys/bus/dsa/devices/dsa<m>/max_work_queues
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The maximum work queue number that this device supports.
What: sys/bus/dsa/devices/dsa<m>/numa_node
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The numa node number for this device.
What: sys/bus/dsa/devices/dsa<m>/op_cap
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The operation capability bit mask specify the operation types
supported by the this device.
What: sys/bus/dsa/devices/dsa<m>/state
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The state information of this device. It can be either enabled
or disabled.
What: sys/bus/dsa/devices/dsa<m>/group<m>.<n>
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The assigned group under this device.
What: sys/bus/dsa/devices/dsa<m>/engine<m>.<n>
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The assigned engine under this device.
What: sys/bus/dsa/devices/dsa<m>/wq<m>.<n>
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The assigned work queue under this device.
What: sys/bus/dsa/devices/dsa<m>/configurable
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: To indicate if this device is configurable or not.
What: sys/bus/dsa/devices/dsa<m>/token_limit
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The maximum number of bandwidth tokens that may be in use at
one time by operations that access low bandwidth memory in the
device.
What: sys/bus/dsa/devices/wq<m>.<n>/group_id
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The group id that this work queue belongs to.
What: sys/bus/dsa/devices/wq<m>.<n>/size
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The work queue size for this work queue.
What: sys/bus/dsa/devices/wq<m>.<n>/type
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The type of this work queue, it can be "kernel" type for work
queue usages in the kernel space or "user" type for work queue
usages by applications in user space.
What: sys/bus/dsa/devices/wq<m>.<n>/cdev_minor
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The minor number assigned to this work queue by the character
device driver.
What: sys/bus/dsa/devices/wq<m>.<n>/mode
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The work queue mode type for this work queue.
What: sys/bus/dsa/devices/wq<m>.<n>/priority
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The priority value of this work queue, it is a vlue relative to
other work queue in the same group to control quality of service
for dispatching work from multiple workqueues in the same group.
What: sys/bus/dsa/devices/wq<m>.<n>/state
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The current state of the work queue.
What: sys/bus/dsa/devices/wq<m>.<n>/threshold
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The number of entries in this work queue that may be filled
via a limited portal.
What: sys/bus/dsa/devices/engine<m>.<n>/group_id
Date: Oct 25, 2019
KernelVersion: 5.6.0
Contact: dmaengine@vger.kernel.org
Description: The group that this engine belongs to.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
Date: June 2018
KernelVersion: 4.19
Contact: Vadim Pasternak <vadimpmellanox.com>
......@@ -19,7 +18,6 @@ Description: These files show with which CPLD versions have been burned
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
Date: December 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
......@@ -30,7 +28,6 @@ Description: This file shows the system fans direction:
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
Date: November 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
......@@ -40,7 +37,6 @@ Description: These files show with which CPLD versions have been burned
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
Date: November 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
......@@ -108,7 +104,6 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
Date: November 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
......@@ -130,6 +125,12 @@ Description: These files show with which CPLD versions have been burned
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
Date: June 2019
KernelVersion: 5.3
Contact: Vadim Pasternak <vadimpmellanox.com>
......@@ -143,9 +144,65 @@ Description: These files show the system reset cause, as following:
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
Date: January 2020
KernelVersion: 5.6
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show system static topology identification
like system's static I2C topology, number and type of FPGA
devices within the system and so on.
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
Date: January 2020
KernelVersion: 5.6
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show the system reset causes, as following: reset
due to AC power failure, reset invoked from software by
assertion reset signal through CPLD. reset caused by signal
asserted by SOC through ACPI register, reset invoked from
software by assertion power off signal through CPLD.
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
Date: January 2020
KernelVersion: 5.6
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: This file allows to retain ASIC up during PCIe root complex
reset, when attribute is set 1.
The file is read/write.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
Date: January 2020
KernelVersion: 5.6
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: This file allows to overwrite system VPD hardware wrtie
protection when attribute is set 1.
The file is read/write.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
Date: January 2020
KernelVersion: 5.6
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: This file exposes the configuration update status of burnable
voltage regulator devices. The status values are as following:
0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
The file is read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
Date: January 2020
KernelVersion: 5.6
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: This file exposes the firmware version of burnable voltage
regulator devices.
The file is read only.
......@@ -16,6 +16,10 @@ Description:
write UDC's name found in /sys/class/udc/*
to bind a gadget, empty string "" to unbind.
max_speed - maximum speed the driver supports. Valid
names are super-speed-plus, super-speed,
high-speed, full-speed, and low-speed.
bDeviceClass - USB device class code
bDeviceSubClass - USB device subclass code
bDeviceProtocol - USB device protocol code
......
......@@ -25,11 +25,11 @@ Description:
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]