Commit cba8dbe0 authored by Lorenzo "Palinuro" Faletra's avatar Lorenzo "Palinuro" Faletra
Browse files

Import Debian changes 5.5.17-1parrot1

linux (5.5.17-1parrot1) rolling-testing; urgency=medium

  * Import new Debian version.

linux (5.5.17-1) unstable; urgency=medium

  * New upstream stable update:
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.14
    - mmc: core: Allow host controllers to require R1B for CMD6
    - mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
    - mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
    - [armhf] mmc: sdhci-omap: Fix busy detection by enabling
      MMC_CAP_NEED_RSP_BUSY
    - [armhf,arm64] mmc: sdhci-tegra: Fix busy detection by enabling
      MMC_CAP_NEED_RSP_BUSY
    - cxgb4: fix throughput drop during Tx backpressure
    - cxgb4: fix Txq restart check during backpressure
    - geneve: move debug check after netdev unregister
    - hsr: fix general protection fault in hsr_addr_is_self()
    - ipv4: fix a RCU-list lock in inet_dump_fib()
    - macsec: restrict to ethernet devices
    - net/bpfilter: fix dprintf usage for /dev/kmsg
    - net: cbs: Fix software cbs to consider packet sending time
    - [armhf,arm64] net: dsa: Fix duplicate frames flooded by learning
    - net: ena: Add PCI shutdown handler to allow safe kexec
    - [armhf] net: mvneta: Fix the case where the last poll did not process all
      rx
    - net/packet: tpacket_rcv: avoid a producer race condition
    - net: phy: dp83867: w/a for fld detect threshold bootstrapping issue
    - [armhf,arm64] net: phy: mdio-bcm-unimac: Fix clock handling
    - net: qmi_wwan: add support for ASKEY WWHC050
    - net/sched: act_ct: Fix leak of ct zone template on replace
    - net_sched: cls_route: remove the right filter from hashtable
    - net_sched: hold rtnl lock in tcindex_partial_destroy_work()
    - net_sched: keep alloc_hash updated after hash allocation
    - [armhf,arm64] net: stmmac: dwmac-rk: fix error path in rk_gmac_probe
    - r8169: re-enable MSI on RTL8168c
    - slcan: not call free_netdev before rtnl_unlock in slcan_open
    - tcp: also NULL skb->dev when copy was needed
    - tcp: ensure skb->dev is NULL before leaving TCP stack
    - tcp: repair: fix TCP_QUEUE_SEQ implementation
    - vxlan: check return value of gro_cells_init()
    - [arm64] Revert "net: bcmgenet: use RGMII loopback for MAC reset"
    - [arm64] net: bcmgenet: keep MAC in reset until PHY is up
    - bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.
    - bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
    - bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.
    - bnxt_en: Free context memory after disabling PCI in probe error path.
    - bnxt_en: Reset rings if ring reservation fails during open()
    - net: ena: fix incorrect setting of the number of msix vectors
    - net: ena: fix request of incorrect number of IRQ vectors
    - net: ena: avoid memory access violation by validating req_id properly
    - net: ena: fix continuous keep-alive resets
    - net: ip_gre: Separate ERSPAN newlink / changelink callbacks
    - net: ip_gre: Accept IFLA_INFO_DATA-less configuration
    - hsr: use rcu_read_lock() in hsr_get_node_{list/status}()
    - hsr: add restart routine into hsr_get_node_list()
    - hsr: set .netnsok flag
    - net/mlx5: DR, Fix postsend actions write length
    - net/mlx5e: Enhance ICOSQ WQE info fields
    - net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
    - net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
    - net/mlx5e: Do not recover from a non-fatal syndrome
    - net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
    - net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow
    - net/mlx5e: Fix endianness handling in pedit mask
    - cgroup-v1: cgroup_pidlist_next should update position index
    - nfs: add minor version to nfs_server_key for fscache
    - drivers/of/of_mdio.c:fix of_mdiobus_register()
    - cgroup1: don't call release_agent when it is ""
    - veth: ignore peer tx_dropped when counting local rx_dropped
    - drm/amd/display: update soc bb for nv14
    - drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20
    - [armhf] drm/exynos: Fix cleanup of IOMMU related objects
    - [x86] iommu/vt-d: Silence RCU-list debugging warnings
    - scsi: ipr: Fix softlockup when rescanning devices in petitboot
    - mac80211: Do not send mesh HWMP PREQ if HWMP is disabled
    - [x86] iommu/vt-d: Fix debugfs register reads
    - [x86] iommu/vt-d: Populate debugfs if IOMMUs are detected
    - Input: fix stale timestamp on key autorepeat events
    - [x86] Input: synaptics - enable RMI on HP Envy 13-ad105ng
    - Input: avoid BIT() macro usage in the serio.h UAPI header
    - IB/rdmavt: Free kernel completion queue when done
    - RDMA/core: Fix missing error check on dev_set_name()
    - RDMA/odp: Fix leaking the tgid for implicit ODP
    - gpiolib: Fix irq_disable() semantics
    - RDMA/nl: Do not permit empty devices names during
      RDMA_NLDEV_CMD_NEWLINK/SET
    - RDMA/mad: Do not crash if the rdma device does not have a umad interface
    - ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL
    - ceph: fix memory leak in ceph_cleanup_snapid_map()
    - [x86] KVM: SVM: Issue WBINVD after deactivating an SEV guest
    - [armhf] dts: dra7: Add bus_dma_limit for L3 bus
    - [armhf] dts: omap5: Add bus_dma_limit for L3 bus
    - perf probe: Fix to delete multiple probe event
    - perf probe: Do not depend on dwfl_module_addrsym()
    - rtlwifi: rtl8188ee: Fix regression due to commit d1d1a96bdb44
    - drm/prime: use dma length macro when mapping sg
    - drm/amdgpu: fix scatter-gather mapping with user pages
    - drm/radeon: fix scatter-gather mapping with user pages
    - [armhf] soc: samsung: chipid: Fix return value on non-Exynos platforms
    - scsi: sd: Fix optimal I/O size for devices that change reported values
    - nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type
    - mac80211: drop data frames without key on encrypted links
    - mac80211: mark station unauthorized before key removal
    - mm/swapfile.c: move inode_lock out of claim_swapfile
    - drivers/base/memory.c: indicate all memory blocks as removable
    - mm/sparse: fix kernel crash with pfn_section_valid check
    - mm: fork: fix kernel_stack memcg stats for various stack implementations
    - [x86] gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
    - gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
    - [x86] gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT +
      AXP288 model
    - bpf: Fix cgroup ref leak in cgroup_bpf_inherit on out-of-memory
    - RDMA/core: Ensure security pkey modify is not lost
    - afs: Fix handling of an abort from a service handler
    - genirq: Fix reference leaks on irq affinity notifiers
    - xfrm: handle NETDEV_UNREGISTER for xfrm device
    - vti[6]: fix packet tx through bpf_redirect() in XinY cases
    - RDMA/mlx5: Fix the number of hwcounters of a dynamic counter
    - RDMA/mlx5: Fix access to wrong pointer while performing flush due to
      error
    - RDMA/mlx5: Block delay drop to unprivileged users
    - xfrm: fix uctx len check in verify_sec_ctx_len
    - xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
    - xfrm: policy: Fix doulbe free in xfrm_policy_timer
    - afs: Fix client call Rx-phase signal handling
    - afs: Fix some tracing details
    - afs: Fix unpinned address list during probing
    - ieee80211: fix HE SPR size calculation
    - mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX
    - netfilter: flowtable: reload ip{v6}h in nf_flow_tuple_ip{v6}
    - netfilter: flowtable: populate addr_type mask
    - netfilter: nft_fwd_netdev: validate family and chain type
    - netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
    - [i386] bpf, x32: Fix bug with JMP32 JSET BPF_X checking upper bits
    - bpf: Initialize storage pointers to NULL to prevent freeing garbage
      pointer
    - bpf/btf: Fix BTF verification of enum members in struct/union
    - bpf, sockmap: Remove bucket->lock from sock_{hash|map}_free
    - [armhf] dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection
    - vti6: Fix memory leak of skb if input policy check fails
    - r8169: fix PHY driver check on platforms w/o module softdeps
    - [x86] clocksource/drivers/hyper-v: Untangle stimers and timesync from
      clocksources
    - bpf: Undo incorrect __reg_bound_offset32 handling
    - USB: serial: option: add support for ASKEY WWHC050
    - USB: serial: option: add BroadMobi BM806U
    - USB: serial: option: add Wistron Neweb D19Q1
    - USB: cdc-acm: restore capability check order
    - USB: serial: io_edgeport: fix slab-out-of-bounds read in
      edge_interrupt_callback
    - [armhf,arm64] usb: musb: fix crash with highmen PIO and usbmon
    - media: flexcop-usb: fix endpoint sanity check
    - media: usbtv: fix control-message timeouts
    - staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table
    - [x86] staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb
    - [x86] staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
    - [x86] ahci: Add Intel Comet Lake H RAID PCI ID
    - libfs: fix infoleak in simple_attr_read()
    - media: ov519: add missing endpoint sanity checks (CVE-2020-11608)
    - media: dib0700: fix rc endpoint lookup
    - media: stv06xx: add missing descriptor sanity checks (CVE-2020-11609)
    - media: xirlink_cit: add missing descriptor sanity checks
      (CVE-2020-11668)
    - media: v4l2-core: fix a use-after-free bug of sd->devnode
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.15
    - bpf: update jmp32 test cases to fix range bound deduction
    - mac80211: Check port authorization in the ieee80211_tx_dequeue() case
    - mac80211: fix authentication with iwlwifi/mvm
    - vt: selection, introduce vc_is_sel
    - vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines
    - vt: switch vt_dont_switch to bool
    - vt: vt_ioctl: remove unnecessary console allocation checks
    - vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
    - vt: vt_ioctl: fix use-after-free in vt_in_use()
    - [x86] platform: pmc_atom: Add Lex 2I385SW to critclk_systems DMI table
    - bpf: Explicitly memset the bpf_attr structure
    - bpf: Explicitly memset some bpf info structures declared on the stack
    - iwlwifi: don't send GEO_TX_POWER_LIMIT if no wgds table
    - [x86] gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT +
      AXP288 model
    - [armhf] clk: imx: Align imx sc clock msg structs to 4
    - [armhf] clk: imx: Align imx sc clock parent msg structs to 4
    - libceph: fix alloc_msg_with_page_vector() memory leaks
    - perf map: Fix off by one in strncpy() size argument
    - [armel,armhf] dts: bcm283x: Fix vc4's firmware bus DMA limitations
    - [armel] bcm2835-rpi-zero-w: Add missing pinctrl name
    - [armhf] dts: imx6: phycore-som: fix arm and soc minimum voltage
    - [armhf] dts: N900: fix onenand timings
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.16
    - ipv4: fix a RCU-list lock in fib_triestat_seq_show
    - net, ip_tunnel: fix interface lookup with no key
    - sctp: fix possibly using a bad saddr with a given dst
    - sctp: fix refcount bug in sctp_wfree
    - [arm64,riscv64] net: macb: Fix handling of fixed-link node
    - nvme-rdma: Avoid double freeing of async event data
    - drm/amdgpu: add fbdev suspend/resume on gpu reset
    - [x86] drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
    - drm/bochs: downgrade pci_request_region failure from error to warning
    - initramfs: restore default compression behavior
    - drm/amdgpu: fix typo for vcn1 idle check
    - tools/power turbostat: Fix gcc build warnings
    - tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks
    - tools/power turbostat: Fix 32-bit capabilities warning
    - padata: fix uninitialized return value in padata_replace()
    - brcmfmac: abort and release host after error
    - XArray: Fix xa_find_next for large multi-index entries
    - misc: rtsx: set correct pcr_ops for rts522A
    - PCI: sysfs: Revert "rescan" file renames
    - [x86] mei: me: add cedar fork device ids
    - nvmem: check for NULL reg_read and reg_write before dereferencing
    - [armhf] extcon: axp288: Add wakeup support
    - Revert "dm: always call blk_queue_split() in dm_process_bio()"
    - [x86] ALSA: hda/ca0132 - Add Recon3Di quirk to handle integrated sound on
      EVGA X99 Classified motherboard
    - iwlwifi: consider HE capability when setting LDPC
    - iwlwifi: yoyo: don't add TLV offset when reading FIFOs
    - iwlwifi: dbg: don't abort if sending DBGC_SUSPEND_RESUME fails
    - rxrpc: Fix sendmsg(MSG_WAITALL) handling
    - IB/hfi1: Ensure pq is not left on waitlist
    - sched: act: count in the size of action flags bitfield
    - tcp: fix TFO SYNACK undo to avoid double-timestamp-undo
    - [x86,ia64] watchdog: iTCO_wdt: Export vendorsupport
    - [x86,ia64] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
    - i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
    - net: genetlink: return the error code when attribute parsing fails.
    - net: Fix Tx hash bound checking
    - net/smc: fix cleanup for linkgroup setup failures
    - padata: always acquire cpu_hotplug_lock before pinst->lock
    - mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
      (CVE-2020-11565)
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.17
    - cxgb4: fix MPS index overwrite when setting MAC address
    - ipv6: don't auto-add link-local address to lag ports
    - [armhf] net: dsa: bcm_sf2: Do not register slave MDIO bus with OF
    - [armhf] net: dsa: bcm_sf2: Ensure correct sub-node is parsed
    - net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before
      accessing PHY registers
    - net_sched: add a temporary refcnt for struct tcindex_data
    - net_sched: fix a missing refcnt in tcindex_init()
    - [armhf,arm64] net: stmmac: dwmac1000: fix out-of-bounds mac address reg
      setting
    - slcan: Don't transmit uninitialized stack data in padding
    - tun: Don't put_page() for all negative return values from XDP program
    - r8169: change back SG and TSO to be disabled by default
    - cxgb4: free MQPRIO resources in shutdown path
    - [s390x] prevent leaking kernel address in BEAR
    - random: always use batched entropy for get_random_u{32,64}
    - [armhf,arm64] usb: dwc3: gadget: Wrap around when skip TRBs
    - slub: improve bit diffusion for freelist ptr obfuscation
    - ubi: fastmap: Free unused fastmap anchor peb during detach
    - RDMA/ucma: Put a lock around every call to the rdma_cm layer
    - RDMA/cma: Teach lockdep about the order of rtnl and lock
    - RDMA/siw: Fix passive connection establishment
    - Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl
    - RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow
    - blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync
    - fbcon: fix null-ptr-deref in fbcon_switch
    - driver core: Reevaluate dev->links.need_for_probe as suppliers are added
    - [x86] iommu/vt-d: Allow devices with RMRRs to use identity domain
    - ACPI: PM: Add acpi_[un]register_wakeup_handler()
    - [x86] platform: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
    - IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
    - IB/hfi1: Fix memory leaks in sysfs registration and unregistration
    - IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads
    - [armhf] imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D
    - [armhf] imx: only select ARM_ERRATA_814220 for ARMv7-A
    - ceph: remove the extra slashes in the server path
    - ceph: canonicalize server path in place

  [ Noah Meyerhans ]
  * Fix autopkgtest failure due to pycodestyle violation
  * [cloud] Re-enable kernel page merge functionality (Closes: #955366)
  * [cloud] Apply a number of additional optimizations (Closes: #947759)
    - Statically link nvme and ext4 drivers with the kernel
    - [amd64] Re-enable SCHED_MC_PRIO
    - Switch to LZ4 for compression
    - Disable a number of additional drivers unlikely to be found in
      cloud environments

  [ Ben Hutchings ]
  * drm: Disable DRM_LEGACY (DRI1)
  * Bump ABI to 2
  * WireGuard: Update for renaming of skb_reset_tc() to skb_reset_redirect()
  * lib/fonts: Enable FONTS, FONT_8x8, FONT_8x16, FONT_TER16x32 for most
    flavours (Closes: #956173)
  * keys: Enable PERSISTENT_KEYRINGS
  * mm: Enable DEFERRED_STRUCT_PAGE_INIT (Closes: #954025)
  * [armel/marvell] mm: Enable COMPACTION (Closes: #949171)
  * [x86} media/cec: Enable CEC_PLATFORM_DRIVERS; enable VIDEO_SECO_CEC as a
    module (Closes: #951543)
  * [x86] sound/soc/intel: Enable SND_SOC_INTEL_BYT_CHT_CX2072X_MACH as module
    (Closes: #951482)

  [ Sudip Mukherjee ]
  * Remove libbpf. (See: #948041)

  [ Jason A. Donenfeld ]
  * Provide wireguard-modules as stop-gap for packages.

  [ Christian Barcenas ]
  * linux-cpupower: Add libcap to Build-Depends and turbostat linker flags

  [ Joel Johnson ]
  * [armhf] Build PHY_MVEBU_A38X_COMPHY module (Closes: #951409)

  [ Josua Mayer ]
  * [arm64] enable support for the Honeycomb arm64 workstation
    (Closes: #948576)

linux (5.5.13-2parrot1) rolling-testing; urgency=medium

  * Import new Debian release.

linux (5.5.13-2) unstable; urgency=medium

  * bpf: Undo incorrect __reg_bound_offset32 handling (CVE-2020-8835)

linux (5.5.13-1) unstable; urgency=medium

  * New upstream release: https://kernelnewbies.org/Linux_5.5
    (Closes: #953680)
  * New upstream stable update:
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.1
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.2
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.3
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.4
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.5
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.6
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.7
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.8
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.9
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.10
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.11
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.12
    https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.5.13

  [ Ben Hutchings ]
  * aufs: Update support patchset to aufs5.x-rcN 20200120; no functional
    change
  * net: Enable NET_SWITCHDEV; disable on armel/marvell (Closes: #949863)
  * [armhf] net/ethernet/ti: Enable TI_CPSW_SWITCHDEV as module; enable TI_CPTS
  * wireless: Enable regulatory.db direct loading:
    - Drop "wireless: Disable regulatory.db direct loading"
    - linux-image: Add Breaks: relation with old wireless-regdb versions
    - Regenerate my wireless-regdb certificate with expected attributes
  * [x86] Drop "Add a SysRq option to lift kernel lockdown" (Closes: #947021)
    - This patch allowed remotely disabling lockdown using usbip
    - Lockdown can be disabled by running "mokutil --disable-validation",
      rebooting, and confirming the change when prompted
  * Set PYTHON=python3 for document build (fixes FTBFS)
  * [x86,arm64] Move linux-headers metapackages to src:linux-signed-*.
    This should ensure that src:linux and src:linux-signed-* transition to
    testing together.
  * debian/bin/gencontrol_signed.py: Generate valid versions in a linux binNMU
  * udeb: Drop zlib-modules packages, as zlib_deflate is now always built-in
    (fixes FTBFS on several architectures)
  * [mips*/octeon] Fix and re-enable the Octeon Ethernet driver
  * [mips*] Fix FTBFS:
    - Increase RELOCATION_TABLE_SIZE to 0x160000
    - Fix exception handler memcpy()
  * debian/config: Delete redundant arch/flavour-specific "debug-info: true"
  * linux-source: Suggest qtbase5-dev instead of the removed libqt4-dev
    (Closes: #953386)
  * Add WireGuard driver and required crypto changes from 5.6-rc7 and
    cryptodev-2.6, thanks to Jason A. Donenfeld (Closes: #953569)
  * drivers/net: Enable WIREGUARD as module
  * debian/control: Use my debian.org email in Uploaders field
  * debian/certs: Rename Romain Perier's certificate to match email address
  * security/integrity/platform_certs: Rebase db-mok-keyring patch set for
    5.5.9
  * [x86] Enable X86_UMIP (previously configured as X86_INTEL_UMIP)
  * Set ABI to 1
  * [amd64] Enable Intel GVT-g (except cloud-amd64) (Closes: #954088):
    - vfio: Enable VFIO_MDEV, VFIO_MDEV_DEVICE as modules
    - i915: Enable DRM_I915_GVT; enable DRM_I915_GVT_KVMGT as module
  * drivers/net/wireless: Enable MT76x0E as module (Closes: #953683)
  * bcmgenet: Backport ACPI support, supporting Raspberry Pi 4
    (Closes: #950578)

  [ Aurelien Jarno ]
  * [riscv64] Enable SECCOMP.

  [ Romain Perier ]
  * [arm64] Enable BCMGENET
  * [arm64] Fix CONFIG_INFINIBAND_HNS_HIP06 and CONFIG_INFINIBAND_HNS_HIP08
    from tristate to boolean
  * debian/certs: Add my own certificate for wireless-regdb
  * debian/patches/debian/wireless-add-debian-wireless-regdb-certificates.patch:
    Add the hexdump of my certificate to this patch, so the kernel can
    directly load the regulatory db and trust it if have I signed it.

  [ Noah Meyerhans ]
  * [arm64] Enable KVM_ARM_HOST and KVM_ARM_PMU
  * [arm64] Enable CONFIG_ARM64_ERRATUM_1418040
  * [arm64/cloud-arm64] Introduce cloud build flavour
  * [cloud] random: Enable RANDOM_TRUST_BOOTLOADER

  [ Mark Pearson ]
  * [amd64] ASoC: Enable SND_SOC_SOF_COMETLAKE_LP_SUPPORT,
    SND_SOC_SOF_COMETLAKE_H_SUPPORT

  [ Christian Barcenas ]
  * lockdown: honor LOCK_DOWN_IN_EFI_SECURE_BOOT=n (Closes: #945604)

  [ Salvatore Bonaccorso ]
  * libcpupower: Lower back soname version to 1 and add new
    cpufreq_{get,put}_boost_frequencies methods

  [ Joel Stanley ]
  * [armhf] Enable ASPEED AST2600 SoC family. This includes all ASPEED symbols
    for the AST2600 and FTGMAC100, the network device used by this SoC. The
    SoC has 5 UARTs so CONFIG_SERIAL_8250_NR_UARTS is bumped to 5 from 4
    in order to correctly register UART5, the boot console.

  [ Petr Stastny ]
  * [x86] i2c: Enable I2C_AMD_MP2 as module (Closes: #955004)

  [ Vagrant Cascadian ]
  * [arm64] Add patch from next-20200325 to enable device-tree for
    Pinebook Pro.

linux (5.5~rc5-1~exp1) experimental; urgency=medium

  * New upstream release candidate

  [ Romain Perier ]
  * [rt] Disable until it is updated for 5.5 or later
  * [mips*] Remove obsolete patch
    MIPS-Loongson-3-Add-Loongson-LS3A-RS780E-1-way-machi.patch
  * Retrieve the new aufs5 patches from the upstream tree, with an update in
    aufs5-standalone.patch (see its header).
  * Refreshed patches:
    - debian/dfsg/vs6624-disable.patch
    - bugfix/all/firmware_class-log-every-success-and-failure.patch
    - bugfix/all/
      radeon-amdgpu-firmware-is-required-for-drm-and-kms-on-r600-onward.patch
    - bugfix/all/disable-some-marvell-phys.patch
    - features/all/
      security-perf-allow-further-restriction-of-perf_event_open.patch
    - features/x86/x86-make-x32-syscall-support-conditional.patch
    - bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch
    - features/all/lockdown/
      efi-add-an-efi_secure_boot-flag-to-indicate-secure-b.patch

  [ Ben Hutchings ]
  * udeb: Add f2fs-modules package
  * linux-kbuild: Stop building pnmtologo
  * linux-kbuild: Add new file to Makefile for kconfig

linux (5.4.19-parrot2) rolling-testing; urgency=medium

  * Rebuild kernel package.
parents d81456c6 99f0f4f4
Pipeline #360 failed with stages
in 2 minutes and 22 seconds
*.c diff=cpp
*.h diff=cpp
*.dtsi diff=dts
*.dts diff=dts
......@@ -32,7 +32,6 @@
*.lzo
*.mod
*.mod.c
*.ns_deps
*.o
*.o.*
*.patch
......@@ -61,6 +60,7 @@ modules.order
/System.map
/Module.markers
/modules.builtin.modinfo
/modules.nsdeps
#
# RPM spec file (make rpm-pkg)
......
......@@ -32,6 +32,7 @@ Andy Adamson <andros@citi.umich.edu>
Antoine Tenart <antoine.tenart@free-electrons.com>
Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
Archit Taneja <archit@ti.com>
Ard Biesheuvel <ardb@kernel.org> <ard.biesheuvel@linaro.org>
Arnaud Patard <arnaud.patard@rtp-net.org>
Arnd Bergmann <arnd@arndb.de>
Axel Dyks <xl@xlsigned.net>
......@@ -98,12 +99,16 @@ Jacob Shin <Jacob.Shin@amd.com>
Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@google.com>
Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@motorola.com>
Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk.kim@samsung.com>
Jakub Kicinski <kuba@kernel.org> <jakub.kicinski@netronome.com>
James Bottomley <jejb@mulgrave.(none)>
James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
James Hogan <jhogan@kernel.org> <james@albanarts.com>
James Ketrenos <jketreno@io.(none)>
Jan Glauber <jan.glauber@gmail.com> <jang@de.ibm.com>
Jan Glauber <jan.glauber@gmail.com> <jang@linux.vnet.ibm.com>
Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
......@@ -148,6 +153,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
......@@ -155,6 +161,7 @@ Mark Brown <broonie@sirena.org.uk>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
Mathieu Othacehe <m.othacehe@gmail.com>
Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
......@@ -260,6 +267,7 @@ Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
Vivien Didelot <vivien.didelot@gmail.com> <vivien.didelot@savoirfairelinux.com>
Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
......@@ -271,3 +279,5 @@ Gustavo Padovan <gustavo@las.ic.unicamp.br>
Gustavo Padovan <padovan@profusion.mobi>
Changbin Du <changbin.du@intel.com> <changbin.du@intel.com>
Changbin Du <changbin.du@intel.com> <changbin.du@gmail.com>
Steve Wise <larrystevenwise@gmail.com> <swise@chelsio.com>
Steve Wise <larrystevenwise@gmail.com> <swise@opengridcomputing.com>
......@@ -1875,8 +1875,9 @@ S: The Netherlands
N: Martin Kepplinger
E: martink@posteo.de
E: martin.kepplinger@ginzinger.com
E: martin.kepplinger@puri.sm
W: http://www.martinkepplinger.com
P: 4096R/5AB387D3 F208 2B88 0F9E 4239 3468 6E3F 5003 98DF 5AB3 87D3
D: mma8452 accelerators iio driver
D: pegasus_notetaker input driver
D: Kernel fixes and cleanups
......
......@@ -314,25 +314,6 @@ Description:
board_id: (RO) Manufacturing board ID
sysfs interface for Chelsio T3 RDMA Driver (cxgb3)
--------------------------------------------------
What: /sys/class/infiniband/cxgb3_X/hw_rev
What: /sys/class/infiniband/cxgb3_X/hca_type
What: /sys/class/infiniband/cxgb3_X/board_id
Date: Feb, 2007
KernelVersion: v2.6.21
Contact: linux-rdma@vger.kernel.org
Description:
hw_rev: (RO) Hardware revision number
hca_type: (RO) HCA type. Here it is a driver short name.
It should normally match the name in its bus
driver structure (e.g. pci_driver::name).
board_id: (RO) Manufacturing board id
sysfs interface for Mellanox ConnectX HCA IB driver (mlx4)
----------------------------------------------------------
......
......@@ -6,10 +6,19 @@ Description: Configures which IO port the host side of the UART
Users: OpenBMC. Proposed changes should be mailed to
openbmc@lists.ozlabs.org
What: /sys/bus/platform/drivers/aspeed-vuart*/sirq
What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq
Date: April 2017
Contact: Jeremy Kerr <jk@ozlabs.org>
Description: Configures which interrupt number the host side of
the UART will appear on the host <-> BMC LPC bus.
Users: OpenBMC. Proposed changes should be mailed to
openbmc@lists.ozlabs.org
What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
Date: July 2019
Contact: Oskar Senft <osk@google.com>
Description: Configures the polarity of the serial interrupt to the
host via the BMC LPC bus.
Set to 0 for active-low or 1 for active-high.
Users: OpenBMC. Proposed changes should be mailed to
openbmc@lists.ozlabs.org
......@@ -67,6 +67,8 @@ Description: Interface for making ib_srp connect to a new target.
initiator is allowed to queue per SCSI host. The default
value for this parameter is 62. The lowest supported value
is 2.
* max_it_iu_size, a decimal number specifying the maximum
initiator to target information unit length.
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
Date: January 2, 2006
......
What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: Dump debug registers from the HPRE cluster.
Only available for PF.
What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: Write the HPRE core selection in the cluster into this file,
and then we can read the debug information of the core.
Only available for PF.
What: /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: HPRE cores debug registers read clear control. 1 means enable
register read clear, otherwise 0. Writing to this file has no
functional effect, only enable or disable counters clear after
reading of these registers.
Only available for PF.
What: /sys/kernel/debug/hisi_hpre/<bdf>/current_qm
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: One HPRE controller has one PF and multiple VFs, each function
has a QM. Select the QM which below qm refers to.
Only available for PF.
What: /sys/kernel/debug/hisi_hpre/<bdf>/regs
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: Dump debug registers from the HPRE.
Only available for PF.
What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_regs
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: Dump debug registers from the QM.
Available for PF and VF in host. VF in guest currently only
has one debug register.
What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: One QM may contain multiple queues. Select specific queue to
show its debug registers in above qm_regs.
Only available for PF.
What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable
Date: Sep 2019
Contact: linux-crypto@vger.kernel.org
Description: QM debug registers(qm_regs) read clear control. 1 means enable
register read clear, otherwise 0.
Writing to this file has no functional effect, only enable or
disable counters clear after reading of these registers.
Only available for PF.
What: /sys/kernel/debug/hisi_sec/<bdf>/sec_dfx
Date: Oct 2019
Contact: linux-crypto@vger.kernel.org
Description: Dump the debug registers of SEC cores.
Only available for PF.
What: /sys/kernel/debug/hisi_sec/<bdf>/clear_enable
Date: Oct 2019
Contact: linux-crypto@vger.kernel.org
Description: Enabling/disabling of clear action after reading
the SEC debug registers.
0: disable, 1: enable.
Only available for PF, and take no other effect on SEC.
What: /sys/kernel/debug/hisi_sec/<bdf>/current_qm
Date: Oct 2019
Contact: linux-crypto@vger.kernel.org
Description: One SEC controller has one PF and multiple VFs, each function
has a QM. This file can be used to select the QM which below
qm refers to.
Only available for PF.
What: /sys/kernel/debug/hisi_sec/<bdf>/qm/qm_regs
Date: Oct 2019
Contact: linux-crypto@vger.kernel.org
Description: Dump of QM related debug registers.
Available for PF and VF in host. VF in guest currently only
has one debug register.
What: /sys/kernel/debug/hisi_sec/<bdf>/qm/current_q
Date: Oct 2019
Contact: linux-crypto@vger.kernel.org
Description: One QM of SEC may contain multiple queues. Select specific
queue to show its debug registers in above 'qm_regs'.
Only available for PF.
What: /sys/kernel/debug/hisi_sec/<bdf>/qm/clear_enable
Date: Oct 2019
Contact: linux-crypto@vger.kernel.org
Description: Enabling/disabling of clear action after reading
the SEC's QM debug registers.
0: disable, 1: enable.
Only available for PF, and take no other effect on SEC.
What: /sys/kernel/debug/hyperv/<UUID>/fuzz_test_state
Date: October 2019
KernelVersion: 5.5
Contact: Branden Bonaby <brandonbonaby94@gmail.com>
Description: Fuzz testing status of a vmbus device, whether its in an ON
state or a OFF state
Users: Debugging tools
What: /sys/kernel/debug/hyperv/<UUID>/delay/fuzz_test_buffer_interrupt_delay
Date: October 2019
KernelVersion: 5.5
Contact: Branden Bonaby <brandonbonaby94@gmail.com>
Description: Fuzz testing buffer interrupt delay value between 0 - 1000
microseconds (inclusive).
Users: Debugging tools
What: /sys/kernel/debug/hyperv/<UUID>/delay/fuzz_test_message_delay
Date: October 2019
KernelVersion: 5.5
Contact: Branden Bonaby <brandonbonaby94@gmail.com>
Description: Fuzz testing message delay value between 0 - 1000 microseconds
(inclusive).
Users: Debugging tools
......@@ -25,6 +25,7 @@ Description:
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
option: [[appraise_type=]] [template=] [permit_directio]
[appraise_flag=]
base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
[FIRMWARE_CHECK]
[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
......@@ -38,6 +39,9 @@ Description:
fowner:= decimal value
lsm: are LSM specific
option: appraise_type:= [imasig] [imasig|modsig]
appraise_flag:= [check_blacklist]
Currently, blacklist check is only for files signed with appended
signature.
template:= name of a defined IMA template type
(eg, ima-ng). Only valid when action is "measure".
pcr:= decimal value
......
......@@ -29,4 +29,9 @@ Description:
17 - sectors discarded
18 - time spent discarding
Kernel 5.5+ appends two more fields for flush requests:
19 - flush requests completed successfully
20 - time spent flushing
For more details refer to Documentation/admin-guide/iostats.rst
......@@ -15,6 +15,12 @@ Description:
9 - I/Os currently in progress
10 - time spent doing I/Os (ms)
11 - weighted time spent doing I/Os (ms)
12 - discards completed
13 - discards merged
14 - sectors discarded
15 - time spent discarding (ms)
16 - flush requests completed
17 - time spent flushing (ms)
For more details refer Documentation/admin-guide/iostats.rst
......
What: /sys/bus/platform/devices/fsi-master/rescan
What: /sys/bus/platform/devices/../fsi-master/fsi0/rescan
Date: May 2017
KernelVersion: 4.12
Contact: cbostic@linux.vnet.ibm.com
Contact: linux-fsi@lists.ozlabs.org
Description:
Initiates a FSI master scan for all connected slave devices
on its links.
What: /sys/bus/platform/devices/fsi-master/break
What: /sys/bus/platform/devices/../fsi-master/fsi0/break
Date: May 2017
KernelVersion: 4.12
Contact: cbostic@linux.vnet.ibm.com
Contact: linux-fsi@lists.ozlabs.org
Description:
Sends an FSI BREAK command on a master's communication
link to any connnected slaves. A BREAK resets connected
device's logic and preps it to receive further commands
from the master.
What: /sys/bus/platform/devices/fsi-master/slave@00:00/term
What: /sys/bus/platform/devices/../fsi-master/fsi0/slave@00:00/term
Date: May 2017
KernelVersion: 4.12
Contact: cbostic@linux.vnet.ibm.com
Contact: linux-fsi@lists.ozlabs.org
Description:
Sends an FSI terminate command from the master to its
connected slave. A terminate resets the slave's state machines
......@@ -29,10 +29,10 @@ Description:
ongoing operation in case of an expired 'Master Time Out'
timer.
What: /sys/bus/platform/devices/fsi-master/slave@00:00/raw
What: /sys/bus/platform/devices/../fsi-master/fsi0/slave@00:00/raw
Date: May 2017
KernelVersion: 4.12
Contact: cbostic@linux.vnet.ibm.com
Contact: linux-fsi@lists.ozlabs.org
Description:
Provides a means of reading/writing a 32 bit value from/to a
specified FSI bus address.
......@@ -753,6 +753,8 @@ What: /sys/.../events/in_illuminance0_thresh_falling_value
what: /sys/.../events/in_illuminance0_thresh_rising_value
what: /sys/.../events/in_proximity0_thresh_falling_value
what: /sys/.../events/in_proximity0_thresh_rising_value
What: /sys/.../events/in_illuminance_thresh_rising_value
What: /sys/.../events/in_illuminance_thresh_falling_value
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
......@@ -972,6 +974,7 @@ What: /sys/.../events/in_activity_jogging_thresh_rising_period
What: /sys/.../events/in_activity_jogging_thresh_falling_period
What: /sys/.../events/in_activity_running_thresh_rising_period
What: /sys/.../events/in_activity_running_thresh_falling_period
What: /sys/.../events/in_illuminance_thresh_either_period
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
......@@ -1715,3 +1718,11 @@ Description:
Mass concentration reading of particulate matter in ug / m3.
pmX consists of particles with aerodynamic diameter less or
equal to X micrometers.
What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available
Date: November 2019
KernelVersion: 5.4
Contact: linux-iio@vger.kernel.org
Description:
List of valid periods (in seconds) for which the light intensity
must be above the threshold level before interrupt is asserted.
What: /sys/bus/iio/devices/iio:deviceX/ac_excitation_en
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
Reading gives the state of AC excitation.
Writing '1' enables AC excitation.
What: /sys/bus/iio/devices/iio:deviceX/bridge_switch_en
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
This bridge switch is used to disconnect it when there is a
need to minimize the system current consumption.
Reading gives the state of the bridge switch.
Writing '1' enables the bridge switch.
What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
Initiates the system calibration procedure. This is done on a
single channel at a time. Write '1' to start the calibration.
What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
Reading returns a list with the possible calibration modes.
There are two available options:
"zero_scale" - calibrate to zero scale
"full_scale" - calibrate to full scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
Sets up the calibration mode used in the system calibration
procedure. Reading returns the current calibration mode.
Writing sets the system calibration mode.
......@@ -26,3 +26,24 @@ KernelVersion: 4.3
Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Stores mei client protocol version
Format: %d
What: /sys/bus/mei/devices/.../max_conn
Date: Nov 2019
KernelVersion: 5.5
Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Stores mei client maximum number of connections
Format: %d
What: /sys/bus/mei/devices/.../fixed
Date: Nov 2019
KernelVersion: 5.5
Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Stores mei client fixed address, if any
Format: %d
What: /sys/bus/mei/devices/.../max_len
Date: Nov 2019
KernelVersion: 5.5
Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Stores mei client maximum message length
Format: %d
......@@ -347,3 +347,16 @@ Description:
If the device has any Peer-to-Peer memory registered, this
file contains a '1' if the memory has been published for
use outside the driver that owns the device.
What: /sys/bus/pci/devices/.../link/clkpm
/sys/bus/pci/devices/.../link/l0s_aspm
/sys/bus/pci/devices/.../link/l1_aspm
/sys/bus/pci/devices/.../link/l1_1_aspm
/sys/bus/pci/devices/.../link/l1_2_aspm
/sys/bus/pci/devices/.../link/l1_1_pcipm
/sys/bus/pci/devices/.../link/l1_2_pcipm
Date: October 2019
Contact: Heiner Kallweit <hkallweit1@gmail.com>
Description: If ASPM is supported for an endpoint, these files can be
used to disable or enable the individual power management
states. Write y/1/on to enable, n/0/off to disable.
......@@ -80,6 +80,14 @@ Contact: thunderbolt-software@lists.01.org
Description: This attribute contains 1 if Thunderbolt device was already
authorized on boot and 0 otherwise.
What: /sys/bus/thunderbolt/devices/.../generation
Date: Jan 2020
KernelVersion: 5.5
Contact: Christian Kellner <christian@kellner.me>
Description: This attribute contains the generation of the Thunderbolt
controller associated with the device. It will contain 4
for USB4.
What: /sys/bus/thunderbolt/devices/.../key
Date: Sep 2017
KernelVersion: 4.13
......@@ -104,6 +112,34 @@ Contact: thunderbolt-software@lists.01.org
Description: This attribute contains name of this device extracted from
the device DROM.
What: /sys/bus/thunderbolt/devices/.../rx_speed
Date: Jan 2020
KernelVersion: 5.5
Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
Description: This attribute reports the device RX speed per lane.
All RX lanes run at the same speed.
What: /sys/bus/thunderbolt/devices/.../rx_lanes
Date: Jan 2020
KernelVersion: 5.5
Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
Description: This attribute reports number of RX lanes the device is
using simultaneusly through its upstream port.
What: /sys/bus/thunderbolt/devices/.../tx_speed
Date: Jan 2020
KernelVersion: 5.5
Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
Description: This attribute reports the TX speed per lane.
All TX lanes run at the same speed.
What: /sys/bus/thunderbolt/devices/.../tx_lanes
Date: Jan 2020
KernelVersion: 5.5
Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
Description: This attribute reports number of TX lanes the device is
using simultaneusly through its upstream port.
What: /sys/bus/thunderbolt/devices/.../vendor
Date: Sep 2017
KernelVersion: 4.13
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment