Commit fa1fc888 authored by Lorenzo "Palinuro" Faletra's avatar Lorenzo "Palinuro" Faletra
Browse files

Import Upstream version 4.15.11

parent f0b500ea
......@@ -7,38 +7,40 @@
# command after changing this file, to see if there are
# any tracked files which get ignored after the change.
#
# Normal rules
# Normal rules (sorted alphabetically)
#
.*
*.a
*.bin
*.bz2
*.c.[012]*.*
*.dtb
*.dtb.S
*.dwo
*.elf
*.gcno
*.gz
*.i
*.ko
*.ll
*.lst
*.lz4
*.lzma
*.lzo
*.mod.c
*.o
*.o.*
*.a
*.order
*.patch
*.s
*.ko
*.so
*.so.dbg
*.mod.c
*.i
*.lst
*.su
*.symtypes
*.order
*.elf
*.bin
*.tar
*.gz
*.bz2
*.lzma
*.xz
*.lz4
*.lzo
*.patch
*.gcno
*.ll
modules.builtin
Module.symvers
*.dwo
*.su
*.c.[012]*.*
modules.builtin
#
# Top-level generic files
......@@ -53,6 +55,11 @@ Module.symvers
/System.map
/Module.markers
#
# RPM spec file (make rpm-pkg)
#
/*.spec
#
# Debian directory (make deb-pkg)
#
......
......@@ -73,6 +73,8 @@ James E Wilson <wilson@specifix.com>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
James Hogan <jhogan@kernel.org> <james@albanarts.com>
James Ketrenos <jketreno@io.(none)>
Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
Jean Tourrilhes <jt@hpl.hp.com>
......@@ -105,6 +107,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
Mark Brown <broonie@sirena.org.uk>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
Matthieu CASTET <castet.matthieu@free.fr>
......
What: /proc/sys/vm/nr_pdflush_threads
Date: June 2012
Contact: Wanpeng Li <liwp@linux.vnet.ibm.com>
Description: Since pdflush is replaced by per-BDI flusher, the interface of old pdflush
exported in /proc/sys/vm/ should be removed.
......@@ -11,7 +11,7 @@ Description:
Kernel code may export it for complete or partial access.
GPIOs are identified as they are inside the kernel, using integers in
the range 0..INT_MAX. See Documentation/gpio.txt for more information.
the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information.
/sys/class/gpio
/export ... asks the kernel to export a GPIO to userspace
......
......@@ -41,3 +41,73 @@ KernelVersion: 4.5
Contact: K. Y. Srinivasan <kys@microsoft.com>
Description: The 16 bit vendor ID of the device
Users: tools/hv/lsvmbus and user level RDMA libraries
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: VCPU (sub)channel is affinitized to
Users: tools/hv/lsvmbus and other debuggig tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: VCPU (sub)channel is affinitized to
Users: tools/hv/lsvmbus and other debuggig tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Inbound channel signaling state
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/latency
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Channel signaling latency
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Outbound channel signaling state
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/pending
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Channel interrupt pending state
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Bytes availabble to read
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Bytes availabble to write
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/events
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Number of times we have signaled the host
Users: Debugging tools
What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts
Date: September. 2017
KernelVersion: 4.14
Contact: Stephen Hemminger <sthemmin@microsoft.com>
Description: Number of times we have taken an interrupt (incoming)
Users: Debugging tools
# Note: This documents additional properties of any device beyond what
# is documented in Documentation/sysfs-rules.txt
# is documented in Documentation/admin-guide/sysfs-rules.rst
What: /sys/devices/*/of_node
Date: February 2015
......
What: /dev/wmi/dell-smbios
Date: November 2017
KernelVersion: 4.15
Contact: "Mario Limonciello" <mario.limonciello@dell.com>
Description:
Perform SMBIOS calls on supported Dell machines.
through the Dell ACPI-WMI interface.
IOCTL's and buffer formats are defined in:
<uapi/linux/wmi.h>
1) To perform an SMBIOS call from userspace, you'll need to
first determine the minimum size of the calling interface
buffer for your machine.
Platforms that contain larger buffers can return larger
objects from the system firmware.
Commonly this size is either 4k or 32k.
To determine the size of the buffer read() a u64 dword from
the WMI character device /dev/wmi/dell-smbios.
2) After you've determined the minimum size of the calling
interface buffer, you can allocate a structure that represents
the structure documented above.
3) In the 'length' object store the size of the buffer you
determined above and allocated.
4) In this buffer object, prepare as necessary for the SMBIOS
call you're interested in. Typically SMBIOS buffers have
"class", "select", and "input" defined to values that coincide
with the data you are interested in.
Documenting class/select/input values is outside of the scope
of this documentation. Check with the libsmbios project for
further documentation on these values.
6) Run the call by using ioctl() as described in the header.
7) The output will be returned in the buffer object.
8) Be sure to free up your allocated object.
......@@ -7,17 +7,37 @@ Description:
HMAC-sha1 value across the extended attributes, storing the
value as the extended attribute 'security.evm'.
EVM depends on the Kernel Key Retention System to provide it
with a trusted/encrypted key for the HMAC-sha1 operation.
The key is loaded onto the root's keyring using keyctl. Until
EVM receives notification that the key has been successfully
loaded onto the keyring (echo 1 > <securityfs>/evm), EVM
can not create or validate the 'security.evm' xattr, but
returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM
should be done as early as possible. Normally this is done
in the initramfs, which has already been measured as part
of the trusted boot. For more information on creating and
loading existing trusted/encrypted keys, refer to:
Documentation/keys-trusted-encrypted.txt. (A sample dracut
patch, which loads the trusted/encrypted key and enables
EVM, is available from http://linux-ima.sourceforge.net/#EVM.)
EVM supports two classes of security.evm. The first is
an HMAC-sha1 generated locally with a
trusted/encrypted key stored in the Kernel Key
Retention System. The second is a digital signature
generated either locally or remotely using an
asymmetric key. These keys are loaded onto root's
keyring using keyctl, and EVM is then enabled by
echoing a value to <securityfs>/evm:
1: enable HMAC validation and creation
2: enable digital signature validation
3: enable HMAC and digital signature validation and HMAC
creation
Further writes will be blocked if HMAC support is enabled or
if bit 32 is set:
echo 0x80000002 ><securityfs>/evm
will enable digital signature validation and block
further writes to <securityfs>/evm.
Until this is done, EVM can not create or validate the
'security.evm' xattr, but returns INTEGRITY_UNKNOWN.
Loading keys and signaling EVM should be done as early
as possible. Normally this is done in the initramfs,
which has already been measured as part of the trusted
boot. For more information on creating and loading
existing trusted/encrypted keys, refer to:
Documentation/security/keys/trusted-encrypted.rst. Both dracut
(via 97masterkey and 98integrity) and systemd (via
core/ima-setup) have support for loading keys at boot
time.
......@@ -522,6 +522,7 @@ Description:
Specifies the output powerdown mode.
DAC output stage is disconnected from the amplifier and
1kohm_to_gnd: connected to ground via an 1kOhm resistor,
2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
90kohm_to_gnd: connected to ground via a 90kOhm resistor,
......@@ -1242,9 +1243,9 @@ What: /sys/.../iio:deviceX/in_distance_raw
KernelVersion: 4.0
Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to read the distance covered by the user
since the last reboot while activated. Units after application
of scale are meters.
This attribute is used to read the measured distance to an object
or the distance covered by the user since the last reboot while
activated. Units after application of scale are meters.
What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
KernelVersion: 3.4.0
......
......@@ -16,3 +16,13 @@ Description:
the motion sensor is placed. For example, in a laptop a motion
sensor can be located on the base or on the lid. Current valid
values are 'base' and 'lid'.
What: /sys/bus/iio/devices/iio:deviceX/id
Date: Septembre 2017
KernelVersion: 4.14
Contact: linux-iio@vger.kernel.org
Description:
This attribute is exposed by the CrOS EC legacy accelerometer
driver and represents the sensor ID as exposed by the EC. This
ID is used by the Android sensor service hardware abstraction
layer (sensor HAL) through the Android container on ChromeOS.
What: /sys/bus/mmc/devices/.../rev
Date: October 2017
Contact: Jin Qian <jinqian@android.com>
Description: Extended CSD revision number
......@@ -110,3 +110,51 @@ Description: When new NVM image is written to the non-active NVM
is directly the status value from the DMA configuration
based mailbox before the device is power cycled. Writing
0 here clears the status.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains name of the property directory the XDomain
service exposes. This entry describes the protocol in
question. Following directories are already reserved by
the Apple XDomain specification:
network: IP/ethernet over Thunderbolt
targetdm: Target disk mode protocol over Thunderbolt
extdisp: External display mode protocol over Thunderbolt
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: Stores the same MODALIAS value emitted by uevent for
the XDomain service. Format: tbtsvc:kSpNvNrN
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain protocol identifier the XDomain
service supports.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain protocol version the XDomain
service supports.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain software version the XDomain
service supports.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain service specific settings as
bitmask. Format: %x
......@@ -211,7 +211,9 @@ Description:
device, after it has been suspended at run time, from a resume
request to the moment the device will be ready to process I/O,
in microseconds. If it is equal to 0, however, this means that
the PM QoS resume latency may be arbitrary.
the PM QoS resume latency may be arbitrary and the special value
"n/a" means that user space cannot accept any resume latency at
all for the given device.
Not all drivers support this attribute. If it isn't supported,
it is not present.
......@@ -258,19 +260,3 @@ Description:
This attribute has no effect on system-wide suspend/resume and
hibernation.
What: /sys/devices/.../power/pm_qos_remote_wakeup
Date: September 2012
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_remote_wakeup attribute
is used for manipulating the PM QoS "remote wakeup required"
flag. If set, this flag indicates to the kernel that the
device is a source of user events that have to be signaled from
its low-power states.
Not all drivers support this attribute. If it isn't supported,
it is not present.
This attribute has no effect on system-wide suspend/resume and
hibernation.
......@@ -187,7 +187,8 @@ Description: Processor frequency boosting control
This switch controls the boost setting for the whole system.
Boosting allows the CPU and the firmware to run at a frequency
beyound it's nominal limit.
More details can be found in Documentation/cpu-freq/boost.txt
More details can be found in
Documentation/admin-guide/pm/cpufreq.rst
What: /sys/devices/system/cpu/cpu#/crash_notes
......@@ -223,7 +224,8 @@ Description: Parameters for the Intel P-state driver
no_turbo: limits the driver to selecting P states below the turbo
frequency range.
More details can be found in Documentation/cpu-freq/intel-pstate.txt
More details can be found in
Documentation/admin-guide/pm/intel_pstate.rst
What: /sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below>
Date: July 2014(documented, existed before August 2008)
......@@ -373,3 +375,19 @@ Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: information about CPUs heterogeneity.
cpu_capacity: capacity of cpu#.
What: /sys/devices/system/cpu/vulnerabilities
/sys/devices/system/cpu/vulnerabilities/meltdown
/sys/devices/system/cpu/vulnerabilities/spectre_v1
/sys/devices/system/cpu/vulnerabilities/spectre_v2
Date: January 2018
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Information about CPU vulnerabilities
The files are named after the code names of CPU
vulnerabilities. The output of those files reflects the
state of the CPUs in the system. Possible output values:
"Not affected" CPU is not affected by the vulnerability
"Vulnerable" CPU is affected and no mitigation in effect
"Mitigation: $M" CPU is affected and mitigation $M is in effect
What: /sys/bus/w1/devices/19-<id>/speed
Date: Sep 2017
KernelVersion: 4.14
Contact: Jan Kandziora <jjj@gmx.de>
Description: When written, this file sets the I2C speed on the connected
DS28E17 chip. When read, it reads the current setting from
the DS28E17 chip.
Valid values: 100, 400, 900 [kBaud].
Default 100, can be set by w1_ds28e17.speed= module parameter.
Users: w1_ds28e17 driver
What: /sys/bus/w1/devices/19-<id>/stretch
Date: Sep 2017
KernelVersion: 4.14
Contact: Jan Kandziora <jjj@gmx.de>
Description: When written, this file sets the multiplier used to calculate
the busy timeout for I2C operations on the connected DS28E17
chip. When read, returns the current setting.
Valid values: 1 to 9.
Default 1, can be set by w1_ds28e17.stretch= module parameter.
Users: w1_ds28e17 driver
......@@ -51,6 +51,18 @@ Description:
Controls the dirty page count condition for the in-place-update
policies.
What: /sys/fs/f2fs/<disk>/min_hot_blocks
Date: March 2017
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
Controls the dirty page count condition for redefining hot data.
What: /sys/fs/f2fs/<disk>/min_ssr_sections
Date: October 2017
Contact: "Chao Yu" <yuchao0@huawei.com>
Description:
Controls the fee section threshold to trigger SSR allocation.
What: /sys/fs/f2fs/<disk>/max_small_discards
Date: November 2013
Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com>
......@@ -102,6 +114,12 @@ Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
Controls the idle timing.
What: /sys/fs/f2fs/<disk>/iostat_enable
Date: August 2017
Contact: "Chao Yu" <yuchao0@huawei.com>
Description:
Controls to enable/disable IO stat.
What: /sys/fs/f2fs/<disk>/ra_nid_pages
Date: October 2015
Contact: "Chao Yu" <chao2.yu@samsung.com>
......@@ -122,6 +140,12 @@ Contact: "Shuoran Liu" <liushuoran@huawei.com>
Description:
Shows total written kbytes issued to disk.
What: /sys/fs/f2fs/<disk>/feature
Date: July 2017
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
Shows all enabled features in current device.
What: /sys/fs/f2fs/<disk>/inject_rate
Date: May 2016
Contact: "Sheng Yong" <shengyong1@huawei.com>
......@@ -138,7 +162,18 @@ What: /sys/fs/f2fs/<disk>/reserved_blocks
Date: June 2017
Contact: "Chao Yu" <yuchao0@huawei.com>
Description:
Controls current reserved blocks in system.
Controls target reserved blocks in system, the threshold
is soft, it could exceed current available user space.
What: /sys/fs/f2fs/<disk>/current_reserved_blocks
Date: October 2017
Contact: "Yunlong Song" <yunlong.song@huawei.com>
Contact: "Chao Yu" <yuchao0@huawei.com>
Description:
Shows current reserved blocks in system, it may be temporarily
smaller than target_reserved_blocks, but will gradually
increase to target_reserved_blocks when more free blocks are
freed by user later.
What: /sys/fs/f2fs/<disk>/gc_urgent
Date: August 2017
......
What: /sys/devices/platform/<platform>/tokens/*
Date: November 2017
KernelVersion: 4.15
Contact: "Mario Limonciello" <mario.limonciello@dell.com>
Description:
A read-only description of Dell platform tokens
available on the machine.
Each token attribute is available as a pair of
sysfs attributes readable by a process with
CAP_SYS_ADMIN.
For example the token ID "5" would be available
as the following attributes:
0005_location
0005_value
Tokens will vary from machine to machine, and
only tokens available on that machine will be
displayed.
What: /sys/devices/platform/<platform>/force_power
Date: September 2017
KernelVersion: 4.15
Contact: "Mario Limonciello" <mario.limonciello@dell.com>
Description:
Modify the platform force power state, influencing
Thunderbolt controllers to turn on or off when no
devices are connected (write-only)
There are two available states:
* 0 -> Force power disabled
* 1 -> Force power enabled
......@@ -18,7 +18,8 @@ Description:
Writing one of the above strings to this file causes the system
to transition into the corresponding state, if available.
See Documentation/power/states.txt for more information.
See Documentation/admin-guide/pm/sleep-states.rst for more
information.
What: /sys/power/mem_sleep
Date: November 2016
......@@ -35,7 +36,8 @@ Description:
represented by it to be used on subsequent attempts to suspend
the system.
See Documentation/power/states.txt for more information.
See Documentation/admin-guide/pm/sleep-states.rst for more
information.
What: /sys/power/disk
Date: September 2006
......
......@@ -81,7 +81,9 @@ If you want the driver to put an event into the event log on a panic,
enable the 'Generate a panic event to all BMCs on a panic' option. If
you want the whole panic string put into the event log using OEM
events, enable the 'Generate OEM events containing the panic string'
option.
option. You can also enable these dynamically by setting the module
parameter named "panic_op" in the ipmi_msghandler module to "event"
or "string". Setting that parameter to "none" disables this function.
Basic Design
------------
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment